* Add doorsense sensor for August 3rd Gen Smart Lock Pro
Add a binary sensor to August for the August 3rd Gen Smart Lock Pro doorsense sensor.
This is a re-do from PR 17116 https://github.com/home-assistant/home-assistant/pull/17116 that I closed due to rebase issue on my end.
* Changed to use snjoetw provided code
Going through the py-august I found that snjoetw had provided updated versions for the august component (august.py and binary_sensor/august.py) to include DoorSense sensor.
Changed what I did to to what snjoetw provided instead as he split it into 2 classes; much cleaner I think.
I modified his coding with:
Fixes that were done to the August component and not part of the coding snjoetw provided.
Added the debug logging improvement I had done in the code.
Note, fix I committed earlier for lock atribute (lock/august.py) is thus still the same.
* Reverted change from add_device to add_entities
Missed an item when merging snjoetw's code with current. Fixed.
* Updated call from add_devices to add_entities as well
Updated the call from add_devices to add_entities.
* Fixed permissions on files
Fixed permissions on components/august.py and binary_snesor/august.py
* Changed if/else to if/continue
Changed logic so that if the door sensor state is unknown during initalization the debug log is written and then continue the loop instead of using if/else logic.
* Added available property for Door Sensor
Added the available property for the Door Sensor and setting it to False if a status unknown is received.
* Updated setting self._available
Changed line for setting self._available to what Martin provided. Much more efficient to read. :-)
* Updgrae blinkpy to 0.10.0
- Remove status sensor (API endpoint unreliable for this)
- Wifi strength reports in wifi bars rather than dBm (result of new API
endpoint)
- Added unique ids based on serial number
* Update requirements
* Add device_registry support for sensor and switch domains
* Add device_registry support for light
* Add device registry to binary_sensor, climate, cover
* Add device registry to zwave fan
* Fix test for config entry loading
* lint
* revert erroneous modification
* Revert device_registry.py change
* Add support for off_delay to MQTT binary_sensor
* Fix debounce, add testcase
* Make off_delay number of seconds instead of timedelta
* Update mqtt.py
* Fix testcase, remove CONF_OFF_DELAY from const.py
* Enable BMW component to be unit system aware
* lint fixes
* use constants for config entries
* remove configuration from component and rely only on HA config of unit_system
* remove unused import
* update code to reflect feedback
* lint fixes
* remove unnecessary comments
* rework return statement to satisfy pylint
* more lint fixes
* add tests for volume utils
* lint fixes
* more lint fixes
* remove unnecessary comments
* Made it possible to define multiple octoprint printers
* style fix
* Added configuration option for octoprint port
* SSL support in octoprint platform configuration
* Octoprint component now auto loads sensor and binary_sensor platforms
* preliminary support for auto discovery of octoprint servers
* Moved sensors and binary sensors configuration into main octoprint configuration
* Using base_url as the key for storing api in the octoprint component
* made sure to not supersede the platforms' domains
* bugfix: continue setting up other printers if one fails
* flake8 style correction
* Added icons to sensors
* Fail platform setup if no printers were successfully added
* Simplified custom validator
* Add additional model name of the Xiaomi Aqara Button (WXKG11LM)
* Add additional model name of the Xiaomi Aqara Wireless Switch (WXKG02LM, WXKG03LM)
* Bump PyXiaomiGateway version
* Using new methods for blink camera
- Refactored blink platform (breaking change)
- Camera needs to be uniquely enabled in config from now on
- Added motion detection enable/disable to camera platform
* Fix motion detection
- bumped blinkpy to 0.8.1
- Added wifi strength sensor
* Added platform schema to sensor
- Added global variables for brand and attribution to main platform
* Removed blink binary sensor
* Add alarm control panel
* Fixed dependency, added alarm_home
* Update requirements
* Fix lint errors
* Updated throttle times
* Add trigger_camera service (replaced snap_picture)
* Add refresh after camera trigger
* Update blinkpy version
* Wait for valid camera response before returning image
- Motion detection now working!
* Updated for new blinkpy 0.9.0
* Add refresh control and other fixes for new blinkpy release
* Add save video service
* Pushing to force bot to update
* Changed based on first review
- Pass blink as BLINK_DATA instead of DOMAIN
- Remove alarm_arm_home from alarm_control_panel
- Re-add discovery with schema for sensors/binar_sensors
- Change motion_detected to a binary_sensor
- Added camera_armed binary sensor
- Update camera device_state_attributes rather than state_attributes
* Moved blink.py to own folder. Added service hints.
* Updated coveragerc to reflect previous change
* Register services with DOMAIN
- Change device add for loop order in binary_sensor
* Fix lint error
* services.async_register -> services.register
Add `unique_id` to all rachio entities
Add platform discovery to rachio component
Move config options from switch.rachio platform to the rachio component
* Use pyspcwebgw library.
* Support alarm triggering.
* Update requirements.
* Add pyspcwebgw to test reqs.
* Also update script.
* Use dispatcher.
* Address review feedback.
* create binary sensor even if initial update fails
* fixed broken test assertion
* fixed broken test assertion
* avoid fetching resource twice - manually in the setup_platform and then through add_devices
* raising PlatformNotReady instead of creating the sensor if the initial rest call fails; throttling the update to avoid fetching the same resource again immediately after setting up sensor
* rolled back throttling of the rest update call; can still avoid updating the binary sensor's rest resoure twice; fixed tests
* typo
* Added support for multiple tag managers. Fixed typo for signal strength.
* Corrected broken merge.
* Fixed flake8/pylint error.
* Improved docstring.
* Allow only_cache parameter in zha.safe_read()
* Use cache_only for binary_sensor.zha initial update.
* Use cache_only for fan.zha initial update.
* Use cache_only for sensor.zha initial update.
* Use cache_only for switch.zha initial update.
* Use cache_only for light.zha initial update.
* Refactor cached only read in zha platform.
* Add zha.configure_reporting() method.
Binds a cluster and configures reporting for the specified attribute.
* git add homeassistant/components/binary_sensor/zha.py
* Refactor sensor.zha to use new 'configure_reporting() method.
* Zha configure reporting - switch (#1)
* use configure_reporting for zha switch
* lint fixes
* Rename variables/classes to properly reflect the content
* Allow device registry to optionally store config entries
* Connections and identifiers are now sets with tupels
* Make config entries mandatory
* Fix duplicate keys in test
* Rename device to device_info
* Entity platform should only create device entries if config_entry_id exists
* Fix Soundtouch tests
* Revert soundtouch to use self.device
* Fix baloobs comments
* Correct type in test
