* Add WS command to help reset custom entity_id
* Calculate suggested object id from entity properties
* Fix logic and add additional tests
* Adjust test
* Update folder_watcher test
* Handle current entity id matches the automatic entity id
* Don't store calculated_object_id
* Update snapshots
* Update snapshots
* Update test
* Tweak logic for reusing current entity_id
* Improve test
* Don't assign same entity_id to several entities
* Prioritize custom entity name
* Update snapshots
* Update snapshots
If the entity is already registered, avoid trying to work
out the suggested_entity_id and suggested_object_id as
async_get_or_create will discard them anyways.
async_add_entities would return early if no entities
were passed but its a bit cleaner to not create the
task in the first place. I noticed in py-spy that
tplink was passing empty lists frequently
which made a task and than did nothing.
* Improve handling of empty iterable in async_add_entities
We had two checks here because we were doing an empty
iterable check. If its a list we can check it directly
but if its not we need to convert it to a list to know
if its empty.
* tweaks
* tasks never used
* Reapply "Add support for subentries to config entries" (#133470) (#136061)
* Reapply "Add support for subentries to config entries" (#133470)
This reverts commit ecb3bf79f3.
* Update test snapshot
* Add config subentry support to device registry (#128157)
* Add config subentry support to device registry
* Apply suggestions from code review
* Update syrupy serializer
* Update snapshots
* Address review comments
* Allow a device to be connected to no or a single subentry of a config entry
* Update snapshots
* Revert "Allow a device to be connected to no or a single subentry of a config entry"
This reverts commit ec6f613151cb4a806b7961033c004b71b76510c2.
* Update test snapshots
* Bump release version in comments
* Rename config_subentries to config_entries_subentries
* Add config subentry support to entity registry (#128155)
* Add config subentry support to entity registry
* Update syrupy serializer
* Update snapshots
* Update snapshots
* Accept suggested changes
* Clean registries when removing subentry (#136671)
* Clean up registries when removing subentry
* Update tests
* Clean up subentries from deleted devices when removing config entry (#136669)
* Clean up subentries from deleted devices when removing config entry
* Move
* Add config subentry support to entity platform (#128161)
* Add config subentry support to entity platform
* Rename subentry_id to config_subentry_id
* Store subentry type in subentry (#136687)
* Add reconfigure support to config subentries (#133353)
* Add reconfigure support to config subentries
* Update test
* Minor adjustment
* Rename supported_subentry_flows to supported_subentry_types
* Address review comments
* Add subentry support to kitchen sink (#136755)
* Add subentry support to kitchen sink
* Add subentry reconfigure support to kitchen_sink
* Update kitchen_sink tests with subentry type stored in config entry
* Update kitchen_sink
* Update kitchen_sink
* Adjust kitchen sink tests
* Fix hassfest
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Improve docstrings and strings.json
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Use translations on SensorEntity unit_of_measurement property
* Use default language for unit translation
* Update brother integration snapshot
* Update snapshots
* Do a sanity check of schema passed to EntityPlatform.async_register_entity_service
* Only attempt to check schema of Schema
* Handle All/Any wrapped in schema
* Clarify comment
* Apply suggestions from code review
Co-authored-by: Robert Resch <robert@resch.dev>
---------
Co-authored-by: Robert Resch <robert@resch.dev>
* Detect incorrect exception in forwarded platforms
If an integration raises ConfigEntryError/ConfigEntryAuthFailed/ConfigEntryAuthFailed
in a forwarded platform it would affect the state of the config entry and cause it to
process unloads and setup retries in while the other platforms continued to setup
* Detect incorrect exception in forwarded platforms
If an integration raises ConfigEntryError/ConfigEntryAuthFailed/ConfigEntryAuthFailed
in a forwarded platform it would affect the state of the config entry and cause it to
process unloads and setup retries in while the other platforms continued to setup
* Update homeassistant/config_entries.py
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* adjust
* fix
---------
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Small speed up to setting up integration and config entries
When profiling tests, I noticed many calls to get_running_loop. In the places
where we are already in a coro, pass the existing loop so it does not have to
be looked up. I did not do this for places were we are not in a coro since there
is risk that an integration could be doing a non-thread-safe call and its better
that the code raises when trying to fetch the running loop vs the performance
improvement for these cases.
* fix merge
* missed some
* Refactor entity_platform polling to avoid double time fetch
Replace async_track_time_interval with loop.call_later
to avoid the useless time fetch every time the listener
fired since we always throw it away
* fix test
* Add thread safety checks to async_create_task
Calling async_create_task from a thread almost always results in an
fast crash. Since most internals are using async_create_background_task
or other task APIs, and this is the one integrations seem to get wrong
the most, add a thread safety check here
* Add thread safety checks to async_create_task
Calling async_create_task from a thread almost always results in an
fast crash. Since most internals are using async_create_background_task
or other task APIs, and this is the one integrations seem to get wrong
the most, add a thread safety check here
* missed one
* Update homeassistant/core.py
* fix mocks
* one more internal
* more places where internal can be used
* more places where internal can be used
* more places where internal can be used
* internal one more place since this is high volume and was already eager_start
* Avoid checking for polling if an entity fails to add
* no need to do protected access
* no need to do protected access
* no need to do protected access
* no need to do protected access
* coverage
* fix test
* fix
* broken one must be first
* Refactor setup time tracking to exclude time waiting on other operations
We now exclude the import time and th time waiting on
base platforms to setup from the setup times
* tweak
* tweak
* tweak
* tweak
* adjust
* fixes
* fixes
* preen
* preen
* tweak
* tweak
* adjust
* tweak
* reduce
* do not count integrtion platforms against their parent integration
* handle legacy tts platforms
* stt as well
* one more wait
* use the same pattern in all the legacy
* fix tts and stt legacy
* fix
* fix
* reduce
* preen
* entity comp does not wait for platforms
* scene blocks as well
* fix test
* test fixes
* coverage
* coverage
* coverage
* fix test
* Update tests/test_setup.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/test_setup.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/setup.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* strip
* strip WAIT_PLATFORM_INTEGRATION
* strip WAIT_PLATFORM_INTEGRATION
* strip WAIT_PLATFORM_INTEGRATION
* strip WAIT_PLATFORM_INTEGRATION
* remove complexity
* Apply suggestions from code review
* no longer works that way
* fixes
* fixes
* fixes
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Phase out periodic tasks
* false by default or some tests will block forever, will need to fix each one manually
* kwarg works
* kwarg works
* kwarg works
* fixes
* fix more tests
* fix more tests
* fix lifx
* opensky
* pvpc_hourly_pricing
* adjust more
* adjust more
* smarttub
* adjust more
* adjust more
* adjust more
* adjust more
* adjust
* no eager executor
* zha
* qnap_qsw
* fix more
* fix fix
* docs
* its a wrapper now
* add more coverage
* coverage
* cover all combos
* more fixes
* more fixes
* more fixes
* remaining issues are legit bugs in tests
* make tplink test more predictable
* more fixes
* feedreader
* grind out some more
* make test race safe
* one more
Petro31
Franck Nijhof
epenet
Artur Pragacz
Alsatian67
Jan Bouwhuis
Erik Montnemery
J. Nick Koston
Joost Lekkerkerker
Tomer
Abílio Costa
Marc Mueller
Paulus Schoutsen
Sid