{
  "common": {
    "code": "Access code",
    "code_input_description": "Code to toggle switchable outputs",
    "encryption_key": "Integration encryption key",
    "encryption_key_description": "If the alarm panel requires encryption, enter the integration encryption key here."
  },
  "config": {
    "abort": {
      "already_configured": "[%key:common::config_flow::abort::already_configured_device%]",
      "reconfigure_successful": "[%key:common::config_flow::abort::reconfigure_successful%]"
    },
    "error": {
      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
      "connection_initialization_failed": "Successfully connected, but failed to read data from the panel. Please check the integration encryption key is correct if your panel requires encryption.",
      "panel_busy": "Successfully connected, but alarm panel reports it's busy. Please check no other connections are active.",
      "unknown": "[%key:common::config_flow::error::unknown%]"
    },
    "step": {
      "code": {
        "data": {
          "code": "[%key:component::satel_integra::common::code%]"
        },
        "data_description": {
          "code": "[%key:component::satel_integra::common::code_input_description%]"
        }
      },
      "reconfigure": {
        "data": {
          "encryption_key": "[%key:component::satel_integra::common::encryption_key%]",
          "host": "[%key:common::config_flow::data::host%]",
          "port": "[%key:common::config_flow::data::port%]"
        },
        "data_description": {
          "encryption_key": "[%key:component::satel_integra::common::encryption_key_description%]",
          "host": "[%key:component::satel_integra::config::step::user::data_description::host%]",
          "port": "[%key:component::satel_integra::config::step::user::data_description::port%]"
        }
      },
      "user": {
        "data": {
          "encryption_key": "[%key:component::satel_integra::common::encryption_key%]",
          "host": "[%key:common::config_flow::data::host%]",
          "port": "[%key:common::config_flow::data::port%]"
        },
        "data_description": {
          "encryption_key": "[%key:component::satel_integra::common::encryption_key_description%]",
          "host": "The IP address of the alarm panel",
          "port": "The port of the alarm panel"
        }
      }
    }
  },
  "config_subentries": {
    "output": {
      "entry_type": "Output",
      "error": {
        "already_configured": "[%key:common::config_flow::abort::already_configured_device%]"
      },
      "initiate_flow": {
        "user": "Add output"
      },
      "step": {
        "reconfigure": {
          "data": {
            "name": "[%key:common::config_flow::data::name%]",
            "type": "[%key:component::satel_integra::config_subentries::output::step::user::data::type%]"
          },
          "data_description": {
            "name": "[%key:component::satel_integra::config_subentries::zone::step::user::data_description::name%]",
            "type": "[%key:component::satel_integra::config_subentries::zone::step::user::data_description::type%]"
          },
          "title": "Reconfigure output {output_number}"
        },
        "user": {
          "data": {
            "name": "[%key:common::config_flow::data::name%]",
            "output_number": "Output number",
            "type": "Output type"
          },
          "data_description": {
            "name": "[%key:component::satel_integra::config_subentries::zone::step::user::data_description::name%]",
            "output_number": "Enter output number to configure",
            "type": "[%key:component::satel_integra::config_subentries::zone::step::user::data_description::type%]"
          },
          "title": "Configure output"
        }
      }
    },
    "partition": {
      "entry_type": "Partition",
      "error": {
        "already_configured": "[%key:common::config_flow::abort::already_configured_device%]"
      },
      "initiate_flow": {
        "user": "Add partition"
      },
      "step": {
        "reconfigure": {
          "data": {
            "arm_home_mode": "[%key:component::satel_integra::config_subentries::partition::step::user::data::arm_home_mode%]",
            "name": "[%key:common::config_flow::data::name%]"
          },
          "data_description": {
            "arm_home_mode": "[%key:component::satel_integra::config_subentries::partition::step::user::data_description::arm_home_mode%]"
          },
          "title": "Reconfigure partition {partition_number}"
        },
        "user": {
          "data": {
            "arm_home_mode": "Arm home mode",
            "name": "[%key:common::config_flow::data::name%]",
            "partition_number": "Partition number"
          },
          "data_description": {
            "arm_home_mode": "The arming mode to use for 'arm home':\nMode 1 fully arms and bypasses zones that have the 'Bypassed if no exit' option enabled.\nMode 2 disarms interior zones; exterior zones trigger silent alarms and other alarm zones trigger loud alarms.\nMode 3 is like mode 2, but delayed zones are instant.",
            "name": "The name to give to the alarm panel",
            "partition_number": "Enter partition number to configure"
          },
          "title": "Configure partition"
        }
      }
    },
    "switchable_output": {
      "entry_type": "Switchable output",
      "error": {
        "already_configured": "[%key:common::config_flow::abort::already_configured_device%]"
      },
      "initiate_flow": {
        "user": "Add switchable output"
      },
      "step": {
        "reconfigure": {
          "data": {
            "name": "[%key:common::config_flow::data::name%]"
          },
          "data_description": {
            "name": "[%key:component::satel_integra::config_subentries::switchable_output::step::user::data_description::name%]"
          },
          "title": "Reconfigure switchable output {switchable_output_number}"
        },
        "user": {
          "data": {
            "name": "[%key:common::config_flow::data::name%]",
            "switchable_output_number": "Switchable output number"
          },
          "data_description": {
            "name": "The name to give to the switch",
            "switchable_output_number": "Enter switchable output number to configure"
          },
          "title": "Configure switchable output"
        }
      }
    },
    "zone": {
      "abort": {
        "entry_not_loaded": "Cannot validate zone temperature support while the integration is disabled."
      },
      "entry_type": "Zone",
      "error": {
        "already_configured": "[%key:common::config_flow::abort::already_configured_device%]",
        "zone_does_not_report_temperature": "This zone does not report temperature data."
      },
      "initiate_flow": {
        "user": "Add zone"
      },
      "step": {
        "reconfigure": {
          "data": {
            "enable_temperature_sensor": "[%key:component::satel_integra::config_subentries::zone::step::user::data::enable_temperature_sensor%]",
            "name": "[%key:common::config_flow::data::name%]",
            "type": "[%key:component::satel_integra::config_subentries::zone::step::user::data::type%]"
          },
          "data_description": {
            "enable_temperature_sensor": "[%key:component::satel_integra::config_subentries::zone::step::user::data_description::enable_temperature_sensor%]",
            "name": "[%key:component::satel_integra::config_subentries::zone::step::user::data_description::name%]",
            "type": "[%key:component::satel_integra::config_subentries::zone::step::user::data_description::type%]"
          },
          "title": "Reconfigure zone {zone_number}"
        },
        "user": {
          "data": {
            "enable_temperature_sensor": "Enable temperature sensor",
            "name": "[%key:common::config_flow::data::name%]",
            "type": "Zone type",
            "zone_number": "Zone number"
          },
          "data_description": {
            "enable_temperature_sensor": "Enable this if the zone also reports a temperature reading",
            "name": "The name to give to the sensor",
            "type": "Choose the device class you would like the sensor to show as",
            "zone_number": "Enter zone number to configure"
          },
          "title": "Configure zone"
        }
      }
    }
  },
  "exceptions": {
    "cannot_connect": {
      "message": "[%key:common::config_flow::error::cannot_connect%]"
    },
    "connection_initialization_failed": {
      "message": "[%key:component::satel_integra::config::error::connection_initialization_failed%]"
    },
    "missing_output_access_code": {
      "message": "Cannot control switchable outputs because no user code is configured for this Satel Integra entry. Configure a code in the integration options to enable output control."
    },
    "panel_busy": {
      "message": "[%key:component::satel_integra::config::error::panel_busy%]"
    }
  },
  "options": {
    "step": {
      "init": {
        "data": {
          "code": "[%key:component::satel_integra::common::code%]"
        },
        "data_description": {
          "code": "[%key:component::satel_integra::common::code_input_description%]"
        }
      }
    }
  },
  "selector": {
    "arm_home_mode": {
      "options": {
        "1": "1 - Full arming + bypasses",
        "2": "2 - No interior zones",
        "3": "3 - No interior zones or entry delay"
      }
    }
  }
}