* Load container images descending by size
Loading container images using docker load seems to require more space
at load time (which gets freed after loading). Loading the largest
container first avoids running out of space.
Currently systemd-timesyncd tries to connect to the NTP server quite
early at boot-up. At this time the network connection has not been
established yet. This causes resolving the NTP server to fail and
a rate limit kicks in which makes systemd-timesyncd wait for 30s until
the next attempt.
Lowering the retry attempt to 10s makes systemd-timesyncd connecting
shortly after.
Note: The rate limit is 10 attempts per 10s. Because the attempts are
immediately exhausted lowering connection retry attempt below 10s
adds no benefit.
See also: https://github.com/systemd/systemd/issues/24298
This makes the Red+Blue Button cause the boot loader to wipe start4.elf,
which is essential for the boot loader to boot from eMMC. With the file
missing, the Raspberry Pi firmware will continue its boot flow and boot
from USB host next. This allows to run the Home Assistant OS Installer
from a USB flash drive again.
Some applications try to increase the buffers for performance reason. The
QUIC Go implementation for instance tries to request a 2048 kiB buffer
size.
The kernel default depends on skubuf size (which is architecture
dependent), but it is memory size independet and typically around 200 kiB
(see [1]).
Other network tuning guides suggest 16MiB for 1GB ethernet, as well as
changing the default as well as maximum bufffer size (see [2]). This
conservatively increases the maximum buffer size to 4MiB.
[1]: https://elixir.bootlin.com/linux/v5.15.45/source/include/net/sock.h#L2742
[2]: https://nateware.com/2013/04/06/linux-network-tuning-for-2013/
* Add open-vm-tools to AArch64 for better VMware support (#1050)
* Bump buildroot
* buildroot 666868435d...de7aa15c65 (1):
> package/openvmtools: bump version to 11.3.5
For phyiscal hardware the default Power Button action has been disabled
to avoid accidentally power down the machine.
However, for virtual machine this method is often used to shutdown the
virtual machine gracefully. Use the regular power settings for virtual
machines.
* Use upstream Linux driver for Bluetooth on ASUS Tinker
* Drop unnecessary Bluetooth initialization systemd service
Bluetooth is now entirely handled by the kernel.
* Recreate defconfigs using savedefconfig target
Buildroot allows to generate minimal defconfigs using the savedefconfig
target. Regenerate all our configurations so they all look alive and are
minimalistc.
* Fix generic_aarch64_defconfig
* Enable additional LED triggers
* Improve Yellow device tree
Fix soundcard name and use BTN_1 as key code.
* Add input-event-daemon configuration
Add minimal input-event-daemon configuration to avoid the default
configuration taking effect. This minimal configuration triggers
the USB configuration import on button press.
* Support firewall matching by pkttype
Matching by pkttype is required by the reference OTBR firewall script.
* Add additional Kernel configurations required for OpenThread.
