As there is VirtualBox available for aarch64 on Apple Macs, provide OS images
also in the native VirtualBox format, which also grants the ability to resize
existing disk images, unlike VMDK.
Fixes#4171 & fixes#4172
Enable option for the netfilter NETMAP target, as it can be useful for some
users. Until now it's been enabled only for some targets as an option coming
from upstream defconfigs; make sure it's available for all targets.
Fixes#4183
The ip6tables configuration is now enabled by default since Docker 27
(see https://github.com/moby/moby/pull/47747). The experimental config
got introduced with the ip6tables flag in #2051. There is no other
experimental feature used from what I am aware of, so lets remove the
experimental flag as well.
Unbind the Bluetooth driver for Broadcom HCI module before the bluetooth
service starts if running on board without WiFi module. This is a replacement
for #2948 but using a more targeted approach for removing the particular driver
and better detection of no-WiFi (thus no-Bluetooth) models.
This still means the driver will be probed and couple of lines printed when it
fails to set baudrate and reset the module, yet this should be benign, at least
the all-zero MAC device no longers appears in Bluetooth stack.
Backport patch for traces appearing since v4.21.0 bump, introduced in #4095.
This change is not available in any newer tagged release of the driver and the
commit message upstream is messed up, hence the reworded patch.
Make sure that all LAN drivers used on Raspberry Pi boards are built-in.
Although they are defined as such in the base defconfig, we change them to
modules in device support includes. For simplicity and keeping kernel config
close to the RPi OS config, change them all to built-in in the main RPi include
for all RPi targets.
This is not only a formal change - at least one regression is known if the PHY
driver on RPi 5 is not built-in and MAC driver is - in that case the PHY hooked
up to the RP1 isn't initialized properly, and it is reported as "Generic PHY"
instead, e.g. breaking the control of LEDs through dtparams. Relevant dmesg log
before the change:
macb 1f00100000.ethernet end0: PHY [1f00100000.ethernet-ffffffff:01] driver [Generic PHY] (irq=POLL)
And after the change:
macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
Fixes#3333
Bind-mount Systemd Journal socket to the Supervisor container. This way
Supervisor can use the socket directly for writing log entries using the
Systemd native Journal protocol [1] instead of logging to stderr of the
container.
[1] https://systemd.io/JOURNAL_NATIVE_PROTOCOL/
This reverts commit eab18076ad.
This change was added in #2948 as a workaround for all-zero adapter appearing
in the HA frontend (#2944). With changes implemented in [1], this is no longer
needed, the only minor issue is that the ghost adapter still appears in
hciconfig (and other utilities') output as reported in [2]. However, this
should be less problematic than the Bluetooth being unavailable if WiFi is
disabled through disable-wifi DT overlay, so let's start with removing the
workaround.
Fixes#2975
[1] https://github.com/Bluetooth-Devices/bluetooth-adapters/pull/105
[2] https://github.com/raspberrypi/linux/issues/5756
When following logs in Home Assitant frontend, the last line may be duplicated
over time when no new lines are added. This is because systemd-journal-gatewayd
incorrectly processed the num_skip part of the Range header, always returning
the last entry even when it should have been skipped.
Backport the patch for Systemd that processes the header correctly.
Fixes#4101
* Bump buildroot to update package/pigz
* Enable parallel gzip for faster Docker pulls
Docker checks if unpigz is available, and if so uses it to unpack
container layers with multiple CPU cores. This should make Docker pulls
faster, especially on lower end hardware.
Since update to Systemd v256.x the Range header requires the num_entries part
and fails if it's not provided, which we worked around by [1]. With this patch
that was already accepted upstream, the workaround shouldn't be necessary
anymore.
[1] https://github.com/home-assistant/supervisor/pull/5827
Add driver for Marvell PHYs, such as 88E1543(4L) on an ASRock C3758D4I-4L
board. Adding it to x86 config only, as it seems it's not widely used anywhere
else.
Fixes#4025
Bump Hailo stuff to the latest version. While this is a breaking change for
add-ons depending on the driver, the most commonly used one (i.e. Frigate)
didn't bump to v4.20.1 on their stable channel either, so it shouldn't have
significant impact. We agreed with @blakeblackshear that once HAOS bumps the
Hailo driver in HAOS 16, Frigate will follow.
Backport /boots endpoint for Systemd so we can use it in Supervisor to get the
actual list of boots. Should be available upstream since Systemd v258, for v256
minor tweaks were needed.
When creating OVA image, the CPU is slacking at the end of the build because it
is creating three ZIP archives, each one on a single CPU only. As we're
creating only single-entry archives, we can use pigz to use all cores.
The actual speedup on my machine (16C/32T) reflects the number of cores - it
takes around 2 seconds instead of 1 minute.
Since
127c420335
change in package/systemd, this option is patched by systemd build because
userspace FW loading has never been supported with Systemd. This should have no
runtime effect, just clear the warning about disabled option.
* package/vcgencmd: add tool for RPi VideoCore commands
This tool is used by rpi-eeprom-update and is fairly lightweight binary without
dependencies. Use it as-is from raspberry/utils repo.
* package/rpi-eeprom: change package to install EEPROM userspace scripts
* configs: enable rpi-eeprom for rpi4, rpi4-64, rpi5-64 and yellow
On Pi5 and Yellow also enable flashrom so the firmware can be installed
directly without recovery being involved. On Yellow/CM4 this can't be done
without config.txt changes though (SPI and pinmuxing needs to be enabled) but
the image is shared there and users may eventually use the tools if they want,
so install BCM2711 on Yellow too. The "officially recommended" method is
rpiboot though, which is also documented in Yellow docs.
Because we use custom compatible strings in Yellow DTS's, the firmware loader
first attempts to load a firmware with this compatible in its name. Because it
doesn't exists, it shows error like this one before falling back to a more
generic one:
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,5-compute-module-ha-yellow.bin failed with error -2
While these errors are mostly harmless, add symlinks with our compatible in the
name to suppress them. Instead of patching upstream
package/brcmfmac_sdio-firmware-rpi which installs the firmware files, add them
to yellow overlay to make maintenance easier.
Latest RPi firmware package contains module options that supposedly improve
stability, with details described in [1].
Since the feature_disable mask also disables the dump_obss feature, this change
would also mitigate `brcmf_set_channel: set chanspec ... fail` messages still
seen in some environments even after #3719.
Fixes#3367
[1] 2788cb549a
* Fix U-Boot config to access all RAM on 16 GB CM5
U-Boot defconfig used for Yellow checks only 4 DRAM banks, however, CM5 with 16
GB has the memory spread across 8 banks. Add a patch (submitted upstream) to
the defconfig to get access to the whole RAM.
Fixes#3989
* Add Upstream tag with link to uboot patchwork
* Update RPi kernel to 6.12.20
Update to latest stable RPi kernel and remove unnecessary 6.6.y kernel config
fragments.
* Refresh RPi and Yellow patches
Rebase all patches on 6.12.20, remove patches that are already present
upstream.
* Update Yellow device trees for 6.12.20
Upstream changes broke our downstream device trees. While the CM4 fix was
trivial, there were more changes in the CM5 device tree due to adaptation to
upstream code. To simplify future maintenance, DTS was refactored to reuse CM5
DTS include and override only what's necessary.
* Bump buildroot to update to matching package/rpi-firmware
* buildroot ead21eb6d2...cd82256125 (1):
> package/rpi-firmware: bump version to f49a396 (1.20250326)
* Update Buildroot base to v2025.02
Packages updated:
* Added host-blake3 1.5.4
* Added host-go-src
* Added host-libxcrypt 4.4.38
* Added host-tar 1.35
* Added host-xxhash 0.8.3
* Added libtalloc 2.4.2
* Added libxcrypt 4.4.38
* apparmor updated from 3.1.2 to 3.1.7
* busybox updated from 1.36.1 to 1.37.0
* cifs-utils updated from 6.15 to 7.1
* containerd updated from 1.7.26 to 2.0.2
* dbus-broker updated from 35 to 36
* dropbear updated from 2024.85 to 2024.86
* e2fsprogs updated from 1.47.0 to 1.47.2
* expat updated from 2.6.4 to 2.7.0
* gcc-final updated from 12.4.0 to 13.3.0
* glibc updated from 2.38-81-gc8cb4d2b86ece572793e31a3422ea29e88d77df5 to 2.41-5-gcb7f20653724029be89224ed3a35d627cc5b4163
* gptfdisk updated from 1.0.9 to 1.0.10
* host-binutils updated from 2.40 to 2.43.1
* host-ccache updated from 4.8.2 to 4.10.2
* host-cmake updated from 3.28.3 to 3.31.5
* host-dtc updated from 1.7.0 to 1.7.2
* host-e2fsprogs updated from 1.47.0 to 1.47.2
* host-elfutils updated from 0.189 to 0.192
* host-expat updated from 2.6.4 to 2.7.0
* host-fakeroot updated from 1.32.1 to 1.36
* host-gawk updated from 5.3.0 to 5.3.1
* host-gcc-final updated from 12.4.0 to 13.3.0
* host-gcc-initial updated from 12.4.0 to 13.3.0
* host-genimage updated from 17 to 18
* host-go updated from 1.22.12 to unknown
* host-gptfdisk updated from 1.0.9 to 1.0.10
* host-kmod updated from 31 to 33
* host-libcap updated from 2.69 to 2.73
* host-libffi updated from 3.4.4 to 3.4.6
* host-libglib2 updated from 2.76.1 to 2.82.5
* host-libopenssl updated from 3.2.4 to 3.4.1
* host-libtirpc updated from 1.3.4 to 1.3.6
* host-libxml2 updated from 2.12.9 to 2.13.6
* host-lz4 updated from 1.9.4 to 1.10.0
* host-lzip updated from 1.23 to 1.25
* host-meson updated from 1.3.1 to 1.7.0
* host-mpc updated from 1.2.1 to 1.3.1
* host-mtools updated from 4.0.43 to 4.0.47
* host-nfs-utils updated from 2.6.4 to 2.8.2
* host-pcre2 updated from 10.42 to 10.44
* host-pkgconf updated from 1.6.3 to 2.3.0
* host-python3 updated from 3.11.11 to 3.12.9
* host-python-flit-core updated from 3.9.0 to 3.10.1
* host-python-jinja2 updated from 3.1.2 to 3.1.5
* host-python-markupsafe updated from 2.1.3 to 3.0.2
* host-python-packaging updated from 23.2 to 24.2
* host-python-pypa-build updated from 1.0.3 to 1.2.2
* host-python-pyproject-hooks updated from 1.0.0 to 1.2.0
* host-python-setuptools updated from 69.0.3 to 75.8.0
* host-python-wheel updated from 0.40.0 to 0.45.1
* host-rauc updated from 1.11.3 to 1.13
* host-sqlite updated from 3.44.2 to 3.48.0
* host-systemd updated from 254.13 to 256.7
* host-util-linux updated from 2.39.3 to 2.40.2
* host-xz updated from 5.4.5 to 5.6.4
* host-zstd updated from 1.5.5 to 1.5.7
* iproute2 updated from 6.7.0 to 6.13.0
* iptables updated from 1.8.9 to 1.8.11
* json-c updated from 0.17 to 0.18
* kmod updated from 31 to 33
* libapparmor updated from 3.1.2 to 3.1.7
* libblockdev updated from 3.1.1 to 3.3.0
* libbytesize updated from 2.7 to 2.10
* libcap-ng updated from 0.8.4 to 0.8.5
* libcap updated from 2.69 to 2.73
* libdnet updated from 1.16.4 to 1.18.0
* libffi updated from 3.4.4 to 3.4.6
* libglib2 updated from 2.76.1 to 2.82.5
* libgudev updated from 237 to 238
* libmicrohttpd updated from 0.9.77 to 1.0.1
* libnftnl updated from 1.2.6 to 1.2.7
* libnl updated from 3.9.0 to 3.11.0
* libnvme updated from 1.7.1 to 1.11.1
* libopenssl updated from 3.2.4 to 3.4.1
* libtirpc updated from 1.3.4 to 1.3.6
* libunistring updated from 1.1 to 1.3
* libusb updated from 1.0.26 to 1.0.27
* lvm2 updated from 2.03.14 to 2.03.27
* nettle updated from 3.9.1 to 3.10.1
* network-manager updated from 1.44.2 to 1.50.2
* nfs-utils updated from 2.6.4 to 2.8.2
* pcre2 updated from 10.42 to 10.44
* procps-ng updated from 4.0.4 to 4.0.5
* rauc updated from 1.11.3 to 1.13
* rpcbind updated from 1.2.6 to 1.2.7
* rtl8821cu updated from 1597dfeda6cefd2e603fc7020ceca226d05fb108 to 96c65c58b544241178638e810b333dcc9aa26b91
* sqlite updated from 3.44.2 to 3.48.0
* systemd updated from 254.13 to 256.7
* util-linux-libs updated from 2.39.3 to 2.40.2
* util-linux updated from 2.39.3 to 2.40.2
* wireless-regdb updated from 2023.09.01 to 2024.10.07
* wpa_supplicant updated from 2.10 to 2.11
* patches/genimage: drop upstreamed patches
* patches/systemd: drop merged patch
* patches/network-manager: drop upstreamed patch
* Add BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_* to defconfigs
