Bluetooth initialization was broken on Yellow because RPi's kernel
started to use initialization by the kernel driver by default, yet
changes from the miniuart-bt overlay are applied directly to Yellow
DTS and had to be updated too. This commit replaces the previous
patch forcing the miniUART usage for Bluetooth with a new one which
is based on the current miniuart-bt-overlay.dts.
Reduce fully-expanded configs versioned in our repository to defconfigs
containing only the necessary options. Just like #2923, this change does
not alter the resulting kernel .config in any way for the affected
platforms (Tinker, Odroid C2/C4/N2).
For tinker and amlogic-based targets we're using checked-in kernel
configs generated by kconfig for some old kernel revisions. Check in
current config before we clean it up and reduce to a smaller stub later.
Clean up all kernel configs and fragments from non-existing kernel
options, invalid choice values and choices that trigger warnings
during kernel package configuration.
Here's an example of warnings triggered for Yellow:
.config:8531:warning: override: MODULE_COMPRESS_NONE changes choice state
.config:8536:warning: override: ZSWAP_COMPRESSOR_DEFAULT_LZ4 changes choice state
.config:8537:warning: override: ZSWAP_ZPOOL_DEFAULT_ZSMALLOC changes choice state
.config:8543:warning: override: CPU_FREQ_DEFAULT_GOV_ONDEMAND changes choice state
.config:8717:warning: override: reassigning to symbol CGROUP_HUGETLB
.config:8767:warning: symbol value 'm' invalid for XFRM
.config:8852:warning: symbol value 'm' invalid for MEDIA_CONTROLLER_DVB
.config:8972:warning: symbol value 'm' invalid for SND_HDA_I915
There were also some options that are set in our or default configs
but end up patched by `KCONFIG_(DIS|EN)ABLE_OPT` in package makefiles,
these options are now explicitly set in our fragments too. For example
this was toggled for `generic_aarch64`:
CONFIG_DEFAULT_SECURITY_APPARMOR n -> y
CONFIG_DEFAULT_SECURITY_DAC y -> n
CONFIG_GCC_PLUGINS y -> n
The only goal of this commit is to make sure no warnings appear
anymore and the resulting kernel configs remain unchanged. This will
allow us to create tools for sanity checks of our kernel config
overrides. There is one single change in `ova` config resulting from
previously invalid `m` option for a bool value:
-# CONFIG_9P_FS_POSIX_ACL is not set
+CONFIG_9P_FS_POSIX_ACL=y
* Use kernel local version for HAOS compiled Linux kernel
Use the local version config option to add "haos" to the system's Linux
kernel version to indicate the kernel is built specifically for Home
Assistant OS. This makes sure to overwrite any other local version (e.g.
provided by Raspberry Pi kernel's defconfig) and makes it easier to
verify something is running on HAOS since the string will be visible in
any Container using `uname -a`.
* Add dash in front
* Add missing dependency to kernel.config
* Move CONFIG_IIO up to follow Kconfig hieararchy
---------
Co-authored-by: Jan Čermák <sairon@users.noreply.github.com>
Make sure the environment can be read and written to SD card as well.
This makes sure that first boot detection works properly too when
booting from SD card.
The patch added in #2434 is not working: IS_ENABLED requires the full
config symbol including CONFIG_ prefix.
Fix the patch to make automatic IPv6 route failover depening on IPv6
reachability probes actually work.
The deployment on dev channel should always be development. The change
came in from the main branch backmerge where the wrong merge strategy
has been used (the merge strategy "ort" along with option "ours" has
been used, instead of the "ours" merge strategy). And since the
deployment was a separate hunk, it resolved to the release branch.
This reverts commit 0ebcdcb9dc.
We only added verity support in HAOS 10.4. However, we currently have
an issue since HAOS 10.3 where certain Realtek network cards don't work
anymore (see issue #2630). For this systems, it won't be possible to
upgrade, even when using the console.
Only having two HAOS releases creates a rather "narrow" upgrade path
accross all boards. There could be more issues where this proves
problematic.
Currently we don't use any new feature of the verity format. Therefor
let's postpone the move to the new format for a couple of releases
for now.
This reverts commit 0ebcdcb9dc.
We only added verity support in HAOS 10.4. However, we currently have
an issue since HAOS 10.3 where certain Realtek network cards don't work
anymore (see issue #2630). For this systems, it won't be possible to
upgrade, even when using the console.
Only having two HAOS releases creates a rather "narrow" upgrade path
accross all boards. There could be more issues where this proves
problematic.
Currently we don't use any new feature of the verity format. Therefor
let's postpone the move to the new format for a couple of releases
for now.
With the move to Docker 23 containerd stores its metadata no longer
undernath the Docker data directory but at its default location at
/var/lib/containerd. Previously Docker passed a containerd configuration
toml file which explicitly set the metadata root underneath Docker's
data directory.
On Home Assistant OS, the new location /var/lib/containerd is on a tmpfs
file system. For unknown reasons, it seems that if containerd's root
directory is on a tmpfs this leads to significantly more syscalls and
hence CPU load.
Change the metadata location to be on the data partition again. Since
containerd is treated separately from Docker these days, use a new
root directory under /mnt/data for containerd as well. With this, the
CPU load of containerd is back to normal.
* Bump buildroot
* buildroot a1bdf74b19...f125c3e292 (1):
> package/containerd: add control for additional build tags
* Drop unnecessary containerd changes
Now that the snappshotter and the CRI plug-ins are disabled we don't
need to configure or disable them via configuration anymore. Drop the
unnecessary configs.
Move from the current plain format to the new verity bundle format. This
requires at least HAOS 10.4 to work. The Supervisor will make sure to
update to the latest minor release of the previous major release, so
updating will work in the regular use case.
* Add fsfreeze support for QEMU/KVM/Proxmox installations
Add fsfreeze scripts which calls the new Supervisor API to freeze Home
Assistant Core and add-ons which support the backup freeze scripts
(`backup_pre` and `backup_post`).
This allows to create safe snapshots with databases running.
* Fix lint issues
This enables backlight support on these hosts, which is useful if
running HASS on an old laptop or tablet and you want to (e.g.) conserve
power by controlling the backlight.
Currently `CONFIG_OVERLAY_FS_METACOPY` and
`CONFIG_OVERLAY_FS_REDIRECT_DIR` kernel options are enabled but not
preferred by Docker. The metadata copy feature is disabled by default,
and also not actively used by the overlayfs2 driver (see
2c3d1f7b4b).
So the metadata copy config is not really problematic per se. However,
it enables the redirect_dir feature. And a kernel which has the
redirect_dir feature compiled in also enables it by default. This
actually makes the overlayfs2 driver to fallback to naive diff, which
is, from what I understand, slower than the overlayfs native diff (see
also
49c3a7c4ba).
The Docker daemon is also reporting this on startup:
Not using native diff for overlay2, this may cause degraded performance
for building images: kernel has CONFIG_OVERLAY_FS_REDIRECT_DIR enabled
Currently `CONFIG_OVERLAY_FS_METACOPY` is enabled, and it also enables
`CONFIG_OVERLAY_FS_REDIRECT_DIR`. There was already a previous attempt
to disable the latter (see #2067).
Disable both configs explicitly until Docker is able to use them.
* Adjust Home Assistant versioning to prepare for new release strategy
With OS 11 we'll create rc pre-releases which will get directly pushed
to the beta channel. In contrast, release builds will get directly
pushed to the stable channel.
Similar to Home Assistant Core we'll create bump commits for all stable
and beta releases. This makes sure that the source code matches the
built binaries for all releases.
The development build will get a generated version. To avoid issues
with the new rc builds the dev build version will get injected on source
level now.
* Apply suggestions from code review
* Download latest stable Supervisor after device wipe
Currently we download the latest tag after a device wipe, which gives us
the latest Supervisor (which quite likely can be a development version).
Use the stable version file instead to get the tag to be used to
download the Supervisor.
* Delete potentially corrupted updater info
This essentially reverts #2380, making sure that Home Assistant OS uses
systemd's latest network naming scheme.
We stick to a certain naming scheme to make sure NetworkManager still
applies the network configuration (which is matched by network interface
name by default).
With Supervisor [PR #4476](https://github.com/home-assistant/supervisor/pull/4476)
NetworkManager uses udev path by default. With this we can safely enable
the new interface naming and NetworkManager will still apply the
configuration based on udev path correctly.
