2c3c066ea0
Add GPIO power button support for ODROID-N2 ( #1161 ) ( #1165 )
2021-01-11 18:14:07 +01:00
59b687f0db
Mention potential need for quirks on usb boot ( #1111 )
...
Directing people from discord to this page but there wasn't any mention they will likely be needing quirks enabled for usb boot on Rpi4. Also some minor layout adjustments on that section.
2020-12-21 11:31:02 +01:00
dadc82ae37
Document Hardkernel WiFi modules WiFi status ( #1099 )
2020-12-18 16:41:13 +01:00
2c335a4dd9
Fix configuration.md link in raspberrypi README.md ( #967 )
2020-11-07 13:39:29 +01:00
0b52271b3a
Support ODROID C4 SBC ( #926 )
...
* initial ODROID-C4 support
* setting clk_ignore_unused
2020-11-05 10:40:25 +01:00
2e2f6e893b
Fix Tinker Board S (eMMC) boot ( #650 ) ( #845 )
...
* Fix Tinker Board S (eMMC) boot (#650 )
Use Tinker Board S U-Boot configuration which is capable to boot from
eMMC as well as from SD card.
Note that this makes U-Boot always claiming to run on Tinker Board S:
..
Model: Rockchip RK3288 Asus Tinker Board S
..
It seems that there is no generic Tinker Board configuration. However,
Tinker Board S configuration really seems to work well with Tinker Board
as well, so just use it.
Also today the U-Boot Makefile seems to generate a working idbloader.img
already. Drop our special handling.
* Use Tinker Board S device tree if booting from eMMC for Linux
Instead of patching the Tinker Board device tree, select the device tree
based on what device we are booting from.
Note: This boots the non-S device tree when booting a Tinker Board S
from SD card! But there is no reliable detection otherwise, so let's
just live with that fact.
* Document how to use our U-Boot to flash eMMC
2020-09-04 21:05:49 +02:00
02836524ce
Documentation ( #769 )
...
* spelling correction
* Restuctured, added "features", "supported hardware", intro for developers and links to the developer documentation.
* Spelling correction
* URL correction
* Documentation restructure
* Moving developer documentation index from top level README to Documentation directory README
* fixing URLS
* Restructuring and adding to board config
* Improving navigation of docs oon github
* New line after first heading
(https://github.com/home-assistant/operating-system/pull/768#discussion_r453336692 )
Co-authored-by: Franck Nijhof <frenck@frenck.nl >
* Update README.md
https://github.com/home-assistant/operating-system/pull/768#discussion_r453336871
Co-authored-by: Franck Nijhof <frenck@frenck.nl >
* Update README.md
(https://github.com/home-assistant/operating-system/pull/768#discussion_r453336999 )
- Surround headings with newlines
- ODROID
- Use dashes for unordered lists
Co-authored-by: Franck Nijhof <frenck@frenck.nl >
* Update README.md
- new line after heading
(https://github.com/home-assistant/operating-system/pull/768#discussion_r453337043 )
Co-authored-by: Franck Nijhof <frenck@frenck.nl >
* Update README.md
- \- for unordered lists
- new line after heading
(https://github.com/home-assistant/operating-system/pull/768#discussion_r453337101 )
Co-authored-by: Franck Nijhof <frenck@frenck.nl >
* Update README.md
- new line after heading
- \- for unordered lists
(https://github.com/home-assistant/operating-system/pull/768#discussion_r453337183 )
Co-authored-by: Franck Nijhof <frenck@frenck.nl >
* Spelling correction, to ensure /Dpcumentation/kernel.mdhas the correct spelling
* capitalisation
* using - for unordered lists
* Adding links to config files
* fixing links to _defconfig files
* fixing link for rpi0_w
* fixing link for rpi3_64 and rpi4_64
* making the ova README consistent with the others
* formmating
* fixing numbered list
* fixing indent for sub-bullets
* questions regarding Tinker S and OVA support
* resolving PR comment from fabaff
* resolving PR comment from fabaff
* https://github.com/home-assistant/operating-system/pull/769\#discussion_r456774209
* Changing uBoot to U-Boot (https://github.com/home-assistant/operating-system/pull/769#discussion_r456774290 )
* s/boot sector/eMMC boot partition/ (See https://github.com/home-assistant/operating-system/pull/769#discussion_r456774329 )
* As per comments here:
https://github.com/home-assistant/operating-system/pull/769#discussion_r456791491
https://github.com/home-assistant/operating-system/pull/769#discussion_r456791580
* HassOS is no longer the official name (https://github.com/home-assistant/operating-system/pull/769#discussion_r456791863 )
* Should be Home Assistant Operating System (or OS) (see https://community.home-assistant.io/t/changing-the-home-assistant-brand/167500/16 ). See also commennts here https://github.com/home-assistant/operating-system/pull/769#discussion_r456793030 , taken in to account along with previous comments about this paragraph.
* s/HassOS/Home Assistant Operating System/
* 8Gb Pi 4 will be supported soon (see comment https://github.com/home-assistant/operating-system/pull/769#discussion_r459768349 )
* resolving conflict with main dev branch.
Co-authored-by: Franck Nijhof <frenck@frenck.nl >
Co-authored-by: Pascal Vizeli <pvizeli@syshack.ch >
2020-08-03 16:31:36 +02:00
78152db78f
Add boot from USB mass storage device support for RPi 4 ( #746 ) ( #776 )
...
* Backport USB PCIe/XHCI patches to U-Boot 2020.07
Backport relevant patches required to make PCIe/USB XHCI work.
* Backport/integrate PCIe device tree changes from upstream Linux
U-Boot uses the device tree provided by upstream Linux. Make sure the
device tree has the relevant chanages to make VL805 USB controller
reset work.
* Document RPi 4 USB mass storage support (#746 )
2020-07-19 13:59:10 +02:00
53bbc43ff3
Add NUC (10) support info ( #766 )
2020-07-08 13:33:07 +02:00
0d892dbf23
Remove wrong support on the docs for Tinker S ( #658 )
2020-05-08 09:38:48 +02:00
6a728d916f
Update nuc.md ( #591 )
2020-02-20 21:42:23 +01:00
329caf6c1c
Cleanup
2020-01-11 16:52:26 +00:00
7b379e648c
Initial support Odroid N2 / Linux 5.4 ( #523 )
...
* Initial version Odroid N2
Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch >
* fix some issue
* optimize
* cleanup kernel config
* Fix HDMI output
* Migrate to upstream u-boot
* Use own HA image
* Add kernel for odroid xu4
* Add N2 to release pipeline
* Use uboot 2020.01 / fix version hardkernel
* Fix image
2020-01-07 18:13:24 +01:00
fed40532c1
rpi: Add USB boot support ( #440 )
2019-07-23 14:28:22 +02:00
08fac89fb0
Note that disk controller must be SATA not SCSI. ( #424 )
...
The image hang on startup on the SCSI controller, which is the default controller type for custom VMs in VMWare Fusion.
2019-07-22 16:49:39 +02:00
14d91e094a
RaspberryPi 4 ( #428 )
...
* RaspberryPi4 support
* Update kernel file
* Fix lint
* Fix uboot defconfig
* Update firmware for rpi4
* fix naming
* Add support for 64bit
* fix path for dts
2019-07-16 09:44:29 +02:00
4d7e0977ac
✏️ More improvements
2019-07-13 15:38:59 +02:00
0f93fcc477
Update ova.md
...
I had issues with "Other Linux (64-bit)", and "Other 4.x or later Linux (64-bit)" appears to be the correct choice.
2019-07-08 18:41:03 -04:00
f0c38a20bc
Update odroid-xu4.md
2019-04-05 09:05:30 -06:00
267b61405d
Update odroid-xu4.md
2019-04-05 08:56:29 -06:00
5e8f910714
Documentation: Tinker eMMC
2019-02-10 23:35:21 +01:00
662eda3c3b
Update odroid-xu4.md
...
Fix bullets
2019-02-06 02:15:51 -07:00
aad41225f4
Create odroid-xu4.md
2019-02-06 02:12:47 -07:00
96e7e57fc4
Add support for the Orange Pi Prime ( #298 )
...
* Add support for the Orange Pi Prime
Signed-off-by: Alastair D'Silva <alastair@d-silva.org >
* Update opi_prime_defconfig
* Delete kernel.config
* Update opi_prime_defconfig
2018-12-31 11:58:41 +01:00
f711123582
Documentation: Add for intel-nuc board ( #295 )
...
Documentation: Add for intel-nuc board
2018-12-28 22:38:50 +01:00
5cdf66c2c8
Typo fix ( #228 )
...
* typo fix
stands instead of stays
* typo fix 2
2018-10-28 00:04:59 +02:00
331336a2d4
Odroid-C2: Fix documentation typo/formatting
2018-08-25 11:48:42 -06:00
8086b55acd
Odroid-C2: Updating Documentation
2018-08-25 11:45:59 -06:00
e20249676a
Documentation: RPI, disable bluetooth for serial console
2018-08-11 23:20:37 +02:00
ef61756566
Documentation: Raspeberry Pi I2C ( #147 )
2018-08-10 12:18:45 +02:00
1dc2392f15
Fix some build errors ( #146 )
...
* Fix folder
* Add tinker board to build all
* Fix download URL
* Revert uart patch
* Fix link p2
* Fix cmdline
2018-08-06 00:51:12 +02:00
eaab4a7a86
Raspberry Pi node of 64bit ( #103 )
2018-07-14 11:07:18 +02:00
1254c6162c
Update Documentation ( #95 )
...
* Update deployment.md
* Update raspberrypi.md
* Update raspberrypi.md
* Update raspberrypi.md
2018-07-12 12:50:28 +02:00
f6a916001d
Update ova.md ( #47 )
2018-06-27 13:56:52 +02:00
23a58b23b5
We publish now the vmdk and not OVA/OVF ( #46 )
...
* Update upload-rel.sh
* Create ova.md
2018-06-27 12:05:44 +02:00
f9f8b91b31
Fix last problem with rpi
...
Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch >
2018-06-11 11:34:31 +00:00
2401c7b0f8
Rename raspberrypi.mk to raspberrypi.md
2018-06-03 15:00:29 +02:00
8d7608d6c8
Create raspberrypi.mk
2018-06-03 13:58:15 +02:00
Stefan Agner
Thanasis
Jakub Bartkowiak
ubergeek801
Adam Griffiths
Simon Opelt
Pascal Vizeli
nepozs
Ryan Bray
Alexey Pristavkin
Franck Nijhof
Brenton
mbo18
Alastair D'Silva
Jasper van der Neut - Stulen
Josh Cooper
Pascal Vizeli