mirror of
https://github.com/home-assistant/operating-system.git
synced 2026-09-30 08:49:07 +01:00
Jan Čermák
2c6d0de965
Preemptively enable larger set of WiFi drivers for all platforms and add more firmwares for them with the aim to harmonize WiFi device support among all boards and to have implicit support of devices that users might want to use. Targets `generic_aarch64`, `generic_x86_64` and `ova` also include options and firmwares for cards that are using PCI/PCIe bus - support for these is in a separate config fragment. Especially the `generic_x86_64` is currently very tight with the rootfs space, so I had to do some triaging and select only sensible drivers and firmwares - especially archaic PCMCIA devices or devices not supporting only 802.11g or lower standards were among the first that I removed during the triaging - we can consider enabling those but this time on an someone's explicit need to have them enabled. This closes #2815 and replaces large part of #2761, also potentially addresses (at least) these: #2806, #2783, #2841, #2776, #2725, #2600 ------------- * Remove WiFi options from generic and board kernel config fragments * Enable MMC in OVA kernel This is needed for SDIO drivers to work. Use the same options as we currently use for generic_x86_64. * Add CRYPTO_MICHAEL_MIC to the common kernel config This is requirement for TKIP and is a dependency of ATH11K driver. * Add kernel config fragments with wireless cards support * Add firmwares for WiFi cards * Enable more Bluetooth device drivers
74 lines
1.5 KiB
Plaintext
74 lines
1.5 KiB
Plaintext
# This fragment contains configuration options for all platforms that
|
|
# should support WiFi connectivity over USB or SDIO. It does not contain
|
|
# drivers for PCI or PCIe devices - those need also inclusion of
|
|
# device-support-wireless-pci.config fragment.
|
|
|
|
# Atheros drivers
|
|
CONFIG_WLAN_VENDOR_ATH=y
|
|
CONFIG_ATH10K=m
|
|
CONFIG_ATH10K_SDIO=m
|
|
CONFIG_ATH10K_USB=m
|
|
CONFIG_ATH6KL=m
|
|
CONFIG_ATH6KL_SDIO=m
|
|
CONFIG_ATH6KL_USB=m
|
|
CONFIG_ATH9K=m
|
|
CONFIG_ATH9K_HTC=m
|
|
CONFIG_CARL9170=m
|
|
|
|
# Broadcom drivers
|
|
CONFIG_WLAN_VENDOR_BROADCOM=y
|
|
CONFIG_B43=m
|
|
CONFIG_B43_PHY_G=y
|
|
CONFIG_B43_PHY_N=y
|
|
CONFIG_B43_PHY_LP=y
|
|
CONFIG_B43_PHY_HT=y
|
|
CONFIG_BRCMSMAC=m
|
|
CONFIG_BRCMFMAC=m
|
|
CONFIG_BRCMFMAC_USB=y
|
|
|
|
# Intel drivers
|
|
# Note: enabling it here but Intel drivers are currently exclusively PCI
|
|
CONFIG_WLAN_VENDOR_INTEL=y
|
|
|
|
# Marvell drivers
|
|
CONFIG_WLAN_VENDOR_MARVELL=y
|
|
CONFIG_MWIFIEX=m
|
|
CONFIG_MWIFIEX_SDIO=m
|
|
CONFIG_MWIFIEX_USB=m
|
|
|
|
# Mediatek drivers
|
|
CONFIG_WLAN_VENDOR_MEDIATEK=y
|
|
CONFIG_MT7601U=m
|
|
CONFIG_MT7663U=m
|
|
CONFIG_MT7663S=m
|
|
CONFIG_MT76x0E=m
|
|
CONFIG_MT76x0U=m
|
|
CONFIG_MT76x2U=m
|
|
CONFIG_MT76x2E=m
|
|
CONFIG_MT7921S=m
|
|
CONFIG_MT7921U=m
|
|
|
|
# Ralink drivers
|
|
CONFIG_WLAN_VENDOR_RALINK=y
|
|
CONFIG_RT2500USB=m
|
|
CONFIG_RT73USB=m
|
|
CONFIG_RT2800USB=m
|
|
CONFIG_RT2800USB_RT3573=y
|
|
CONFIG_RT2800USB_RT53XX=y
|
|
CONFIG_RT2800USB_RT55XX=y
|
|
CONFIG_RT2800USB_UNKNOWN=y
|
|
CONFIG_RT2X00=m
|
|
|
|
# Realtek drivers
|
|
CONFIG_WLAN_VENDOR_REALTEK=y
|
|
CONFIG_RTL8XXXU=m
|
|
CONFIG_RTL8192CU=m
|
|
CONFIG_RTL_CARDS=m
|
|
CONFIG_RTW88=m
|
|
CONFIG_RTW89=m
|
|
|
|
# Staging drivers
|
|
CONFIG_STAGING=y
|
|
CONFIG_RTL8723BS=m
|
|
CONFIG_R8188EU=m
|