remove stale contrib/Suse

dnsmasq is included in SUSE Linux since 2004.

Signed-off-by: Olaf Hering <olaf@aepfle.de>

contrib/Suse/README

@@ -1,6 +0,0 @@
-This packaging is now unmaintained in the dnsmasq source: dnsmasq is
-included in Suse proper, and up-to-date packages are now available
-from 
-
-ftp://ftp.suse.com/pub/people/ug/
-

contrib/Suse/README.susefirewall

@@ -1,27 +0,0 @@
-This is a patch against SuSEfirewall2-3.1-206 (SuSE 9.x and older)
-It fixes the dependency from the dns daemon name 'named'
-After appending the patch, the SuSEfirewall is again able to autodetect 
-the dnsmasq named service.
-This is a very old bug in the SuSEfirewall script.
-The SuSE people think the name of the dns server will always 'named'
-
-
---- /sbin/SuSEfirewall2.orig	2004-01-23 13:30:09.000000000 +0100
-+++ /sbin/SuSEfirewall2	2004-01-23 13:31:56.000000000 +0100
-@@ -764,7 +764,7 @@
-     echo 'FW_ALLOW_INCOMING_HIGHPORTS_UDP should be set to yes, if you are running a DNS server!'
- 
- test "$FW_SERVICE_AUTODETECT" = yes -o "$FW_SERVICE_AUTODETECT" = dmz -o "$FW_SERVICE_AUTODETECT" = ext && {
--    test "$FW_SERVICE_DNS" = no -a '!' "$START_NAMED" = no && check_srv named && {
-+    test "$FW_SERVICE_DNS" = no -a '!' "$START_NAMED" = no && check_srv dnsmasq && {
- 	echo -e 'Warning: detected activated named, enabling FW_SERVICE_DNS!
- You still have to allow tcp/udp port 53 on internal, dmz and/or external.'
- 	FW_SERVICE_DNS=$FW_SERVICE_AUTODETECT
-@@ -878,7 +878,7 @@
- test -e /etc/resolv.conf || echo "Warning: /etc/resolv.conf not found"
- # Get ports/IP bindings of NAMED/SQUID
- test "$FW_SERVICE_DNS" = yes -o "$FW_SERVICE_DNS" = dmz -o "$FW_SERVICE_DNS" = ext -o "$START_NAMED" = yes && DNS_PORT=`$LSOF -i -n -P | \
--    $AWK -F: '/^named .* UDP / {print $2}'| $GREP -vw 53 | $SORT -un`
-+    $AWK -F: '/^dnsmasq .* UDP / {print $2}'| $GREP -vw 53 | $SORT -un`
- test "$FW_SERVICE_SQUID" = yes -o "$FW_SERVICE_SQUID" = dmz -o "$FW_SERVICE_SQUID" = ext -o "$START_SQUID" = yes && SQUID_PORT=`$LSOF -i -n -P | \
-     $AWK -F: '/^squid .* UDP/ {print $2}'| $SORT -un`

contrib/Suse/dnsmasq-SuSE.patch

@@ -1,23 +0,0 @@
---- man/dnsmasq.8	2004-08-08 20:57:56.000000000 +0200
-+++ man/dnsmasq.8	2004-08-12 00:40:01.000000000 +0200
-@@ -69,7 +69,7 @@
- .TP
- .B \-g, --group=<groupname> 
- Specify the group which dnsmasq will run
--as. The defaults to "dip", if available, to facilitate access to
-+as. The defaults to "dialout", if available, to facilitate access to
- /etc/ppp/resolv.conf which is not normally world readable.
- .TP
- .B \-v, --version
---- src/config.h	2004-08-11 11:39:18.000000000 +0200
-+++ src/config.h	2004-08-12 00:40:01.000000000 +0200
-@@ -44,7 +44,7 @@
- #endif
- #define DEFLEASE 3600 /* default lease time, 1 hour */
- #define CHUSER "nobody"
--#define CHGRP "dip"
-+#define CHGRP "dialout"
- #define DHCP_SERVER_PORT 67
- #define DHCP_CLIENT_PORT 68
- 
-

contrib/Suse/dnsmasq-suse.spec

@@ -1,111 +0,0 @@
-###############################################################################
-#
-# General
-#
-###############################################################################
-
-Name: dnsmasq
-Version: 2.33
-Release: 1
-Copyright: GPL
-Group: Productivity/Networking/DNS/Servers
-Vendor: Simon Kelley
-Packager: Simon Kelley
-URL: http://www.thekelleys.org.uk/dnsmasq
-Provides: dns_daemon
-Conflicts: bind bind8 bind9
-PreReq: %fillup_prereq %insserv_prereq
-Autoreqprov: on
-Source0: %{name}-%{version}.tar.bz2
-BuildRoot: /var/tmp/%{name}-%{version}
-Summary: A lightweight caching nameserver
-
-%description
-Dnsmasq is lightweight, easy to configure DNS forwarder and DHCP server. It 
-is designed to provide DNS and, optionally, DHCP, to a small network. It can
-serve the names of local machines which are not in the global DNS. The DHCP 
-server integrates with the DNS server and allows machines with DHCP-allocated
-addresses to appear in the DNS with names configured either in each host or 
-in a central configuration file. Dnsmasq supports static and dynamic DHCP 
-leases and BOOTP for network booting of diskless machines.
-
-
-
-###############################################################################
-#
-# Build
-#
-###############################################################################
-
-%prep
-%setup -q
-patch -p0 <rpm/%{name}-SuSE.patch
-
-%build
-%{?suse_update_config:%{suse_update_config -f}}
-make all-i18n DESTDIR=$RPM_BUILD_ROOT PREFIX=/usr
-
-###############################################################################
-#
-# Install
-#
-###############################################################################
-
-%install
-rm -rf $RPM_BUILD_ROOT
-mkdir -p ${RPM_BUILD_ROOT}/etc/init.d
-make install-i18n DESTDIR=$RPM_BUILD_ROOT PREFIX=/usr
-install -o root -g root -m 755 rpm/rc.dnsmasq-suse $RPM_BUILD_ROOT/etc/init.d/dnsmasq
-install -o root -g root -m 644 dnsmasq.conf.example $RPM_BUILD_ROOT/etc/dnsmasq.conf
-strip $RPM_BUILD_ROOT/usr/sbin/dnsmasq
-ln -sf ../../etc/init.d/dnsmasq $RPM_BUILD_ROOT/usr/sbin/rcdnsmasq
-
-###############################################################################
-#
-# Clean up
-#
-###############################################################################
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-###############################################################################
-#
-# Post-install scriptlet
-#
-###############################################################################
-
-%post
-%{fillup_and_insserv dnsmasq}
-
-###############################################################################
-#
-# Post-uninstall scriptlet
-#
-# The %postun script executes after the package has been removed. It is the
-# last chance for a package to clean up after itself.
-#
-###############################################################################
-
-%postun
-%{insserv_cleanup}
-
-###############################################################################
-#
-# File list
-#
-###############################################################################
-
-%files
-%defattr(-,root,root)
-%doc CHANGELOG COPYING FAQ doc.html setup.html UPGRADING_to_2.0 rpm/README.susefirewall
-%doc contrib
-%config /etc/init.d/dnsmasq
-%config /etc/dnsmasq.conf
-/usr/sbin/rcdnsmasq
-/usr/sbin/dnsmasq
-/usr/share/locale/*/LC_MESSAGES/*
-%doc %{_mandir}/man8/dnsmasq.8.gz
-%doc %{_mandir}/*/man8/dnsmasq.8.gz
-
-

contrib/Suse/rc.dnsmasq-suse

@@ -1,79 +0,0 @@
-#! /bin/sh
-#
-# init.d/dnsmasq
-#
-### BEGIN INIT INFO
-# Provides:       dnsmasq
-# Required-Start: $network $remote_fs $syslog
-# Required-Stop:
-# Default-Start:  3 5
-# Default-Stop:
-# Description:    Starts internet name service masq caching server (DNS)
-### END INIT INFO
-
-NAMED_BIN=/usr/sbin/dnsmasq
-NAMED_PID=/var/run/dnsmasq.pid
-NAMED_CONF=/etc/dnsmasq.conf
-
-if [ ! -x $NAMED_BIN ] ; then
-	echo -n "dnsmasq not installed ! "
-	exit 5
-fi
-
-. /etc/rc.status
-rc_reset
-
-case "$1" in
-    start)
-	echo -n "Starting name service masq caching server "
-        checkproc -p $NAMED_PID $NAMED_BIN
-        if [ $? -eq 0 ] ; then
-           echo -n "- Warning: dnsmasq already running ! "
-        else
-           [ -e $NAMED_PID ] && echo -n "- Warning: $NAMED_PID exists ! "
-	fi
-	startproc -p $NAMED_PID $NAMED_BIN -u nobody
-	rc_status -v
-	;;
-    stop)
-	echo -n "Shutting name service masq caching server "
-	checkproc -p $NAMED_PID $NAMED_BIN
-	[ $? -ne 0 ] && echo -n "- Warning: dnsmasq not running ! "
-	killproc -p $NAMED_PID -TERM $NAMED_BIN
-	rc_status -v
-	;;
-    try-restart)
-	$0 stop  &&  $0 start
-	rc_status
-	;;
-    restart)
-	$0 stop
-	$0 start
-	rc_status
-	;;
-    force-reload)
-	$0 reload
-	rc_status
-	;;
-    reload)
-	echo -n "Reloading name service masq caching server "
-	checkproc -p $NAMED_PID $NAMED_BIN
-	[ $? -ne 0 ] && echo -n "- Warning: dnsmasq not running ! "
-	killproc -p $NAMED_PID -HUP $NAMED_BIN
-	rc_status -v
-	;;
-    status)
-	echo -n "Checking for name service masq caching server "
-	checkproc -p $NAMED_PID $NAMED_BIN
-	rc_status -v
-	;;
-    probe)
-	test $NAMED_CONF -nt $NAMED_PID && echo reload
-	;;
-    *)
-	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
-	exit 1
-	;;
-esac
-rc_exit
-