Error: DEADCODE (CWE-561): [#def12]
dnsmasq-2.86rc3/src/dnsmasq.c:37: assignment: Assigning: "bind_fallback" = "0".
dnsmasq-2.86rc3/src/dnsmasq.c:927: const: At condition "bind_fallback", the value of "bind_fallback" must be equal to 0.
dnsmasq-2.86rc3/src/dnsmasq.c:927: dead_error_condition: The condition "bind_fallback" cannot be true.
dnsmasq-2.86rc3/src/dnsmasq.c:928: dead_error_line: Execution cannot reach this statement: "my_syslog(4, "setting --bin...".
dnsmasq-2.86rc3/src/dnsmasq.c:928: effectively_constant: Local variable "bind_fallback" is assigned only once, to a constant value, making it effectively constant throughout its scope. If this is not the intent, examine the logic to see if there is a missing assignment that would make "bind_fallback" not remain constant.
# 926|
# 927| if (bind_fallback)
# 928|-> my_syslog(LOG_WARNING, _("setting --bind-interfaces option because of OS limitations"));
# 929|
# 930| if (option_bool(OPT_NOWILD))
Error: REVERSE_NEGATIVE (CWE-191): [#def13]
dnsmasq-2.86rc3/src/dnsmasq.c:383: negative_sink_in_call: Passing "dnsmasq_daemon->pxefd" to a parameter that cannot be negative.
dnsmasq-2.86rc3/src/dnsmasq.c:1086: check_after_sink: You might be using variable "dnsmasq_daemon->pxefd" before verifying that it is >= 0.
# 1084| {
# 1085| poll_listen(daemon->dhcpfd, POLLIN);
# 1086|-> if (daemon->pxefd != -1)
# 1087| poll_listen(daemon->pxefd, POLLIN);
# 1088| }
Error: CHECKED_RETURN (CWE-252): [#def18]
dnsmasq-2.86rc3/src/dnsmasq.c:1582: check_return: Calling "fcntl(dnsmasq_daemon->helperfd, 4, i & 0xfffffffffffff7ff)" without checking return value. This library function may fail and return an error code.
# 1580| /* block in writes until all done */
# 1581| if ((i = fcntl(daemon->helperfd, F_GETFL)) != -1)
# 1582|-> fcntl(daemon->helperfd, F_SETFL, i & ~O_NONBLOCK);
# 1583| do {
# 1584| helper_write();
Error: CHECKED_RETURN (CWE-252): [#def22]
dnsmasq-2.86rc3/src/dnsmasq.c:1991: check_return: Calling "fcntl(confd, 4, flags & 0xfffffffffffff7ff)" without checking return value. This library function may fail and return an error code.
# 1989| Reset that here. */
# 1990| if ((flags = fcntl(confd, F_GETFL, 0)) != -1)
# 1991|-> fcntl(confd, F_SETFL, flags & ~O_NONBLOCK);
# 1992|
# 1993| buff = tcp_request(confd, now, &tcp_addr, netmask, auth_dns);
Error: CHECKED_RETURN (CWE-252): [#def26]
dnsmasq-2.86rc3/src/dnssec.c:727: check_return: Calling "extract_name" without checking return value (as is done elsewhere 9 out of 10 times).
dnsmasq-2.86rc3/src/dnssec.c:459: example_checked: Example 1: "extract_name(header, plen, &p, keyname, 1, 0)" has its value checked in "extract_name(header, plen, &p, keyname, 1, 0)".
dnsmasq-2.86rc3/src/dnssec.c:269: example_checked: Example 2: "extract_name(header, plen, &state->ip, state->buff, 1, 0)" has its value checked in "extract_name(header, plen, &state->ip, state->buff, 1, 0)".
dnsmasq-2.86rc3/src/dnssec.c:569: example_checked: Example 3: "extract_name(header, plen, &p, keyname, 1, 0)" has its value checked in "extract_name(header, plen, &p, keyname, 1, 0)".
dnsmasq-2.86rc3/src/rfc1035.c:648: example_checked: Example 4: "extract_name(header, qlen, &p1, name, 1, 0)" has its value checked in "extract_name(header, qlen, &p1, name, 1, 0)".
dnsmasq-2.86rc3/src/rfc1035.c:787: example_checked: Example 5: "extract_name(header, qlen, &p1, name, 1, 0)" has its value checked in "extract_name(header, qlen, &p1, name, 1, 0)".
# 725| /* namebuff used for workspace above, restore to leave unchanged on exit */
# 726| p = (unsigned char*)(rrset[0]);
# 727|-> extract_name(header, plen, &p, name, 1, 0);
# 728|
# 729| if (key)
Error: CHECKED_RETURN (CWE-252): [#def27]
dnsmasq-2.86rc3/src/dnssec.c:1020: check_return: Calling "extract_name" without checking return value (as is done elsewhere 7 out of 8 times).
dnsmasq-2.86rc3/src/auth.c:140: example_checked: Example 1: "extract_name(header, qlen, &p, name, 1, 4)" has its value checked in "extract_name(header, qlen, &p, name, 1, 4)".
dnsmasq-2.86rc3/src/dnssec.c:771: example_checked: Example 2: "extract_name(header, plen, &p, name, 1, 4)" has its value checked in "extract_name(header, plen, &p, name, 1, 4)".
dnsmasq-2.86rc3/src/hash-questions.c:57: example_checked: Example 3: "extract_name(header, plen, &p, name, 1, 4)" has its value checked in "extract_name(header, plen, &p, name, 1, 4)".
dnsmasq-2.86rc3/src/rfc1035.c:1028: example_checked: Example 4: "extract_name(header, qlen, &p, name, 1, 4)" has its value checked in "extract_name(header, qlen, &p, name, 1, 4)".
dnsmasq-2.86rc3/src/rfc1035.c:1438: example_checked: Example 5: "extract_name(header, qlen, &p, name, 1, 4)" has its value checked in "extract_name(header, qlen, &p, name, 1, 4)".
# 1018|
# 1019| p = (unsigned char *)(header+1);
# 1020|-> extract_name(header, plen, &p, name, 1, 4);
# 1021| p += 4; /* qtype, qclass */
# 1022|
Error: NULL_RETURNS (CWE-476): [#def114]
dnsmasq-2.86test7/src/radv.c:748: returned_null: "expand" returns "NULL" (checked 10 out of 11 times).
dnsmasq-2.86test7/src/radv.c:748: var_assigned: Assigning: "p" = "NULL" return value from "expand".
dnsmasq-2.86test7/src/radv.c:749: dereference: Dereferencing a pointer that might be "NULL" "p" when calling "memset". [Note: The source code implementation of the function has been overridden by a builtin model.]
dnsmasq-2.86test7/src/outpacket.c:83: example_checked: Example 1: "expand(len)" has its value checked in "p = expand(len)".
dnsmasq-2.86test7/src/outpacket.c:109: example_checked: Example 2: "expand(1UL)" has its value checked in "p = expand(1UL)".
dnsmasq-2.86test7/src/radv.c:269: example_checked: Example 3: "expand(16UL)" has its value checked in "ra = expand(16UL)".
dnsmasq-2.86test7/src/radv.c:363: example_checked: Example 4: "expand(32UL)" has its value checked in "opt = expand(32UL)".
dnsmasq-2.86test7/src/radv.c:708: example_checked: Example 5: "expand(32UL)" has its value checked in "opt = expand(32UL)".
# 747| int len = (maclen + 9) >> 3;
# 748| unsigned char *p = expand(len << 3);
# 749|-> memset(p, 0, len << 3);
# 750| *p++ = ICMP6_OPT_SOURCE_MAC;
# 751| *p++ = len;
Error: NULL_RETURNS (CWE-476): [#def115]
dnsmasq-2.86test7/src/radv.c:748: returned_null: "expand" returns "NULL" (checked 10 out of 11 times).
dnsmasq-2.86test7/src/radv.c:748: var_assigned: Assigning: "p" = "NULL" return value from "expand".
dnsmasq-2.86test7/src/radv.c:750: dereference: Incrementing a pointer which might be null: "p".
dnsmasq-2.86test7/src/outpacket.c:83: example_checked: Example 1: "expand(len)" has its value checked in "p = expand(len)".
dnsmasq-2.86test7/src/outpacket.c:109: example_checked: Example 2: "expand(1UL)" has its value checked in "p = expand(1UL)".
dnsmasq-2.86test7/src/radv.c:269: example_checked: Example 3: "expand(16UL)" has its value checked in "ra = expand(16UL)".
dnsmasq-2.86test7/src/radv.c:363: example_checked: Example 4: "expand(32UL)" has its value checked in "opt = expand(32UL)".
dnsmasq-2.86test7/src/radv.c:708: example_checked: Example 5: "expand(32UL)" has its value checked in "opt = expand(32UL)".
# 748| unsigned char *p = expand(len << 3);
# 749| memset(p, 0, len << 3);
# 750|-> *p++ = ICMP6_OPT_SOURCE_MAC;
# 751| *p++ = len;
# 752| memcpy(p, mac, maclen);
Error: STRING_OVERFLOW (CWE-120): [#def99]
dnsmasq-2.86test7/src/option.c:801: fixed_size_dest: You might overrun the 100-character fixed-size string "buff" by copying "usage[i].arg" without checking the length.
# 799| if (usage[i].arg)
# 800| {
# 801|-> strcpy(buff, usage[i].arg);
# 802| for (j = 0; tab[j].handle; j++)
# 803| if (tab[j].handle == *(usage[i].arg))
Error: CLANG_WARNING: [#def100]
dnsmasq-2.86test7/src/option.c:962:3: warning[deadcode.DeadStores]: Value stored to 'domain' is never read
# 960| }
# 961|
# 962|-> domain += sprintf(domain, "in-addr.arpa");
# 963|
# 964| return 1;
Error: CLANG_WARNING: [#def101]
dnsmasq-2.86test7/src/option.c:981:3: warning[deadcode.DeadStores]: Value stored to 'domain' is never read
# 979| domain += sprintf(domain, "%.1x.", (i>>2) & 1 ? dig & 15 : dig >> 4);
# 980| }
# 981|-> domain += sprintf(domain, "ip6.arpa");
# 982|
# 983| return 1;
Error: RESOURCE_LEAK (CWE-772): [#def102] [important]
dnsmasq-2.86test7/src/option.c:1809: alloc_fn: Storage is returned from allocation function "opt_malloc".
dnsmasq-2.86test7/src/option.c:1809: var_assign: Assigning: "path" = storage returned from "opt_malloc(strlen(directory) + len + 2UL)".
dnsmasq-2.86test7/src/option.c:1810: noescape: Resource "path" is not freed or pointed-to in "strcpy". [Note: The source code implementation of the function has been overridden by a builtin model.]
dnsmasq-2.86test7/src/option.c:1811: noescape: Resource "path" is not freed or pointed-to in "strcat". [Note: The source code implementation of the function has been overridden by a builtin model.]
dnsmasq-2.86test7/src/option.c:1812: noescape: Resource "path" is not freed or pointed-to in "strcat". [Note: The source code implementation of the function has been overridden by a builtin model.]
dnsmasq-2.86test7/src/option.c:1815: noescape: Resource "path" is not freed or pointed-to in "stat".
dnsmasq-2.86test7/src/option.c:1809: overwrite_var: Overwriting "path" in "path = opt_malloc(strlen(directory) + len + 2UL)" leaks the storage that "path" points to.
# 1807| continue;
# 1808|
# 1809|-> path = opt_malloc(strlen(directory) + len + 2);
# 1810| strcpy(path, directory);
# 1811| strcat(path, "/");
Error: RESOURCE_LEAK (CWE-772): [#def103] [important]
dnsmasq-2.86test7/src/option.c:1809: alloc_fn: Storage is returned from allocation function "opt_malloc".
dnsmasq-2.86test7/src/option.c:1809: var_assign: Assigning: "path" = storage returned from "opt_malloc(strlen(directory) + len + 2UL)".
dnsmasq-2.86test7/src/option.c:1810: noescape: Resource "path" is not freed or pointed-to in "strcpy". [Note: The source code implementation of the function has been overridden by a builtin model.]
dnsmasq-2.86test7/src/option.c:1811: noescape: Resource "path" is not freed or pointed-to in "strcat". [Note: The source code implementation of the function has been overridden by a builtin model.]
dnsmasq-2.86test7/src/option.c:1812: noescape: Resource "path" is not freed or pointed-to in "strcat". [Note: The source code implementation of the function has been overridden by a builtin model.]
dnsmasq-2.86test7/src/option.c:1815: noescape: Resource "path" is not freed or pointed-to in "stat".
dnsmasq-2.86test7/src/option.c:1858: leaked_storage: Variable "path" going out of scope leaks the storage it points to.
# 1856| free(files);
# 1857| }
# 1858|-> break;
# 1859| }
# 1860|
Error: RESOURCE_LEAK (CWE-772): [#def104] [important]
dnsmasq-2.86test7/src/option.c:1996: alloc_fn: Storage is returned from allocation function "canonicalise_opt".
dnsmasq-2.86test7/src/option.c:1996: var_assign: Assigning: "name" = storage returned from "canonicalise_opt(arg)".
dnsmasq-2.86test7/src/option.c:1998: leaked_storage: Variable "name" going out of scope leaks the storage it points to.
# 1996| if (!(name = canonicalise_opt(arg)) ||
# 1997| (comma && !(target = canonicalise_opt(comma))))
# 1998|-> ret_err(_("bad MX name"));
# 1999|
# 2000| new = opt_malloc(sizeof(struct mx_srv_record));
Error: RESOURCE_LEAK (CWE-772): [#def106] [important]
dnsmasq-2.86test7/src/option.c:3477: alloc_fn: Storage is returned from allocation function "opt_malloc".
dnsmasq-2.86test7/src/option.c:3477: var_assign: Assigning: "new" = storage returned from "opt_malloc(96UL)".
dnsmasq-2.86test7/src/option.c:3618: leaked_storage: Variable "new" going out of scope leaks the storage it points to.
# 3616| sprintf(errstr, _("duplicate dhcp-host IP address %s"),
# 3617| daemon->addrbuff);
# 3618|-> return 0;
# 3619| }
# 3620| }
Error: RESOURCE_LEAK (CWE-772): [#def108] [important]
dnsmasq-2.86test7/src/option.c:3781: alloc_fn: Storage is returned from allocation function "opt_malloc".
dnsmasq-2.86test7/src/option.c:3781: var_assign: Assigning: "new" = storage returned from "opt_malloc(32UL)".
dnsmasq-2.86test7/src/option.c:3786: leaked_storage: Variable "new" going out of scope leaks the storage it points to.
# 3784|
# 3785| if (!(comma = split(arg)) || (len = strlen(comma)) == 0)
# 3786|-> ret_err(gen_err);
# 3787|
# 3788| new->wildcard = 0;
Error: RESOURCE_LEAK (CWE-772): [#def109] [important]
dnsmasq-2.86test7/src/option.c:3921: alloc_fn: Storage is returned from allocation function "opt_malloc".
dnsmasq-2.86test7/src/option.c:3921: var_assign: Assigning: "new" = storage returned from "opt_malloc(56UL)".
dnsmasq-2.86test7/src/option.c:3994: leaked_storage: Variable "new" going out of scope leaks the storage it points to.
# 3992| }
# 3993|
# 3994|-> ret_err(gen_err);
# 3995| }
# 3996|
Error: CLANG_WARNING: [#def111]
dnsmasq-2.86test7/src/option.c:4693:25: warning[deadcode.DeadStores]: Value stored to 'tmp' during its initialization is never read
# 4691| if (!canon)
# 4692| {
# 4693|-> struct name_list *tmp = new->names, *next;
# 4694| for (tmp = new->names; tmp; tmp = next)
# 4695|
Error: CLANG_WARNING: [#def30]
dnsmasq-2.86test7/src/dbus.c:117:3: warning[deadcode.DeadStores]: Value stored to 'w' is never read
# 115| daemon->watches = w;
# 116|
# 117|-> w = data; /* no warning */
# 118| return TRUE;
# 119| }
Error: CLANG_WARNING: [#def31]
dnsmasq-2.86test7/src/dbus.c:137:3: warning[deadcode.DeadStores]: Value stored to 'w' is never read
# 135| }
# 136|
# 137|-> w = data; /* no warning */
# 138| }
# 139|
Error: CHECKED_RETURN (CWE-252): [#def32]
dnsmasq-2.86test7/src/dbus.c:146: check_return: Calling "dbus_message_iter_init" without checking return value (as is done elsewhere 4 out of 5 times).
dnsmasq-2.86test7/src/dbus.c:460: example_checked: Example 1: "dbus_message_iter_init(message, &iter)" has its value checked in "dbus_message_iter_init(message, &iter)".
dnsmasq-2.86test7/src/dbus.c:573: example_checked: Example 2: "dbus_message_iter_init(message, &iter)" has its value checked in "dbus_message_iter_init(message, &iter)".
dnsmasq-2.86test7/src/dbus.c:257: example_checked: Example 3: "dbus_message_iter_init(message, &iter)" has its value checked in "dbus_message_iter_init(message, &iter)".
dnsmasq-2.86test7/src/dbus.c:427: example_checked: Example 4: "dbus_message_iter_init(message, &iter)" has its value checked in "dbus_message_iter_init(message, &iter)".
# 144| char *domain;
# 145|
# 146|-> dbus_message_iter_init(message, &iter);
# 147|
# 148| mark_servers(SERV_FROM_DBUS);
Error: NEGATIVE_RETURNS (CWE-394): [#def33]
dnsmasq-2.86test7/src/dbus.c:547: negative_return_fn: Function "parse_hex((char *)hwaddr, dhcp_chaddr, 16, NULL, &hw_type)" returns a negative number.
dnsmasq-2.86test7/src/dbus.c:547: assign: Assigning: "hw_len" = "parse_hex((char *)hwaddr, dhcp_chaddr, 16, NULL, &hw_type)".
dnsmasq-2.86test7/src/dbus.c:551: negative_returns: "hw_len" is passed to a parameter that cannot be negative.
# 549| hw_type = ARPHRD_ETHER;
# 550|
# 551|-> lease_set_hwaddr(lease, dhcp_chaddr, clid, hw_len, hw_type,
# 552| clid_len, now, 0);
# 553| lease_set_expires(lease, expires, now);
Error: CLANG_WARNING: [#def34]
dnsmasq-2.86test7/src/dbus.c:722:3: warning[deadcode.DeadStores]: Value stored to 'method' is never read
# 720| clear_cache_and_reload(dnsmasq_time());
# 721|
# 722|-> method = user_data; /* no warning */
# 723|
# 724| /* If no reply or no error, return nothing */
Error: UNINIT (CWE-457): [#def2]
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release.c:265: var_decl: Declaring variable "ifr" without initializer.
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release.c:285: uninit_use_in_call: Using uninitialized value "ifr". Field "ifr.ifr_ifru" is uninitialized when calling "setsockopt".
# 283| strncpy(ifr.ifr_name, argv[1], sizeof(ifr.ifr_name)-1);
# 284| ifr.ifr_name[sizeof(ifr.ifr_name)-1] = '\0';
# 285|-> if (setsockopt(fd, SOL_SOCKET, SO_BINDTODEVICE, &ifr, sizeof(ifr)) == -1)
# 286| {
# 287| perror("cannot setup interface");
Error: CHECKED_RETURN (CWE-252): [#def3]
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release6.c:346: check_return: Calling "inet_pton" without checking return value (as is done elsewhere 61 out of 72 times).
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release6.c:188: example_assign: Example 1: Assigning: "s" = return value from "inet_pton(10, ip, &result.ip)".
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release6.c:189: example_checked: Example 1 (cont.): "s" has its value checked in "s <= 0".
dnsmasq-2.86test7/src/cache.c:1108: example_checked: Example 2: "inet_pton(10, token, &addr)" has its value checked in "inet_pton(10, token, &addr) > 0".
dnsmasq-2.86test7/src/dbus.c:525: example_checked: Example 3: "inet_pton(2, ipaddr, &addr.addr4)" has its value checked in "inet_pton(2, ipaddr, &addr.addr4)".
dnsmasq-2.86test7/src/domain.c:138: example_checked: Example 4: "inet_pton(prot, tail, addr)" has its value checked in "inet_pton(prot, tail, addr)".
dnsmasq-2.86test7/src/lease.c:81: example_checked: Example 5: "inet_pton(10, dnsmasq_daemon->namebuff, &addr.addr6)" has its value checked in "inet_pton(10, dnsmasq_daemon->namebuff, &addr.addr6)".
# 344| client_addr.sin6_flowinfo = 0;
# 345| client_addr.sin6_scope_id =0;
# 346|-> inet_pton(AF_INET6, "::", &client_addr.sin6_addr);
# 347| bind(sock, (struct sockaddr*)&client_addr, sizeof(struct sockaddr_in6));
# 348| inet_pton(AF_INET6, DHCP6_MULTICAST_ADDRESS, &server_addr.sin6_addr);
Error: CHECKED_RETURN (CWE-252): [#def4]
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release6.c:347: check_return: Calling "bind(sock, (struct sockaddr *)&client_addr, 28U)" without checking return value. This library function may fail and return an error code.
# 345| client_addr.sin6_scope_id =0;
# 346| inet_pton(AF_INET6, "::", &client_addr.sin6_addr);
# 347|-> bind(sock, (struct sockaddr*)&client_addr, sizeof(struct sockaddr_in6));
# 348| inet_pton(AF_INET6, DHCP6_MULTICAST_ADDRESS, &server_addr.sin6_addr);
# 349| server_addr.sin6_port = htons(DHCP6_SERVER_PORT);
Error: CHECKED_RETURN (CWE-252): [#def5]
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release6.c:348: check_return: Calling "inet_pton" without checking return value (as is done elsewhere 61 out of 72 times).
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release6.c:188: example_assign: Example 1: Assigning: "s" = return value from "inet_pton(10, ip, &result.ip)".
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release6.c:189: example_checked: Example 1 (cont.): "s" has its value checked in "s <= 0".
dnsmasq-2.86test7/src/cache.c:1108: example_checked: Example 2: "inet_pton(10, token, &addr)" has its value checked in "inet_pton(10, token, &addr) > 0".
dnsmasq-2.86test7/src/dbus.c:525: example_checked: Example 3: "inet_pton(2, ipaddr, &addr.addr4)" has its value checked in "inet_pton(2, ipaddr, &addr.addr4)".
dnsmasq-2.86test7/src/domain.c:138: example_checked: Example 4: "inet_pton(prot, tail, addr)" has its value checked in "inet_pton(prot, tail, addr)".
dnsmasq-2.86test7/src/lease.c:81: example_checked: Example 5: "inet_pton(10, dnsmasq_daemon->namebuff, &addr.addr6)" has its value checked in "inet_pton(10, dnsmasq_daemon->namebuff, &addr.addr6)".
# 346| inet_pton(AF_INET6, "::", &client_addr.sin6_addr);
# 347| bind(sock, (struct sockaddr*)&client_addr, sizeof(struct sockaddr_in6));
# 348|-> inet_pton(AF_INET6, DHCP6_MULTICAST_ADDRESS, &server_addr.sin6_addr);
# 349| server_addr.sin6_port = htons(DHCP6_SERVER_PORT);
# 350| int16_t recv_size = 0;
Error: NEGATIVE_RETURNS (CWE-394): [#def6]
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release6.c:360: var_tested_neg: Variable "recv_size" tests negative.
dnsmasq-2.86test7/contrib/lease-tools/dhcp_release6.c:373: negative_returns: "recv_size" is passed to a parameter that cannot be negative.
# 371| }
# 372|
# 373|-> int16_t result = parse_packet(response, recv_size);
# 374| if (result == NOT_REPLY_CODE)
# 375| {
This patch also changes the method of calling querystr() such that
it is only called when logging is enabled, to eliminate any
possible performance problems from searching the larger table.
Optimization that only runs IDN processing if it would alter the domain
name (non-ascii or uppercase characters).
This patch has conributions from Petr Menšík.
Calls to libidn on names without with only a-z A-Z - _ 0-9
have no effect, but are slow. This change elides those calls.
Patch inspire by analysis and an earlier patch from
Gustaf Ullberg <gustaf.ullberg@gmail.com>
Try and log exactly what was returned, rather than just what
got cached. Also give validation status of RRsets if extra logging specified.
This commit also fixes a long-standing bug in caching of CNAME chains
leading to a PTR record.
Based on and inspired by a patch from Dominik DL6ER <dl6er@dl6er.de>
Move dhcp-range bracket indicating option.
There should already be an end-address or mode when adding a netmask.
Also the date bumped.
Signed-off-by: Geert Stappers <stappers@stappers.nl>
This brings the log levels emitted by connmark pattern code in line with
the rest of the code base. LOG_DEBUG is used for diagnostics that may be
verbose depending on the request patterns. LOG_ERR is used for problems
with the implementation itself.
Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
When destroying the UBus context, private fields of our ubus_object were
being reset to 0 while UBus was still owning those objects. While this
seems to work out fine, it seems cleaner to first release the object so
that UBus no longer owns it, before proceding to reset those fields.
Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
There was a `notify` variable to keep track whether a subscriber is
observing our UBus object. However, it was not properly cleaned up in
`ubus_destroy`, potentially becoming stale over UBus reconnections.
The variable was removed and the current state is examined when sending
notifications, similarly as is done in other existing OpenWrt code.
Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
The various blob / blobmsg commands can fail, e.g., when memory is low.
Previously, those errors were silently discarded. This patch adds checks
for the error conditions, logging them and exiting from the functions.
Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
When destroying the UBus context, private fields of our ubus_object were
being reset to 0 while UBus was still owning those objects. While this
seems to work out fine, it seems cleaner to first release the object so
that UBus no longer owns it, before proceding to reset those fields.
Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
observing our UBus object. However, it was not properly cleaned up in
`ubus_destroy`, potentially becoming stale over UBus reconnections.
The variable was removed and the current state is examined when sending
notifications, similarly as is done in other existing OpenWrt code.
Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
