Check sender of all received packets, as specified in RFC 1350 para 4.
My understanding of the example in the RFC is that it in fact only
applies to server-to-client packets, and packet loss or duplication
cannot result in a client sending from more than one port to a server.
This check is not, therefore, strictly needed on the server side.
It's still useful, and adds a little security against packet
spoofing. (though if you're running TFTP on a public network with
bad actors, nothing can really save you.)
Previously, without min-port or max-port configured, dnsmasq would
default to the compiled in defaults for those, which are 1024 and
65535. Now, when neither are configured, it defaults instead to
the kernel's ephemeral port range, which is typically
32768 to 60999 on Linux systems. This change eliminates the
possibility that dnsmasq may be using a registered port > 1024
when a long-running daemon starts up and wishes to claim it.
This change does likely slighly reduce the number of random ports
and therefore the protection from reply spoofing. The older
behaviour can be restored using the min-port and max-port config
switches should that be a concern.
CVE-2021-3448 applies.
It's possible to specify the source address or interface to be
used when contacting upstream nameservers: server=8.8.8.8@1.2.3.4
or server=8.8.8.8@1.2.3.4#66 or server=8.8.8.8@eth0, and all of
these have, until now, used a single socket, bound to a fixed
port. This was originally done to allow an error (non-existent
interface, or non-local address) to be detected at start-up. This
means that any upstream servers specified in such a way don't use
random source ports, and are more susceptible to cache-poisoning
attacks.
We now use random ports where possible, even when the
source is specified, so server=8.8.8.8@1.2.3.4 or
server=8.8.8.8@eth0 will use random source
ports. server=8.8.8.8@1.2.3.4#66 or any use of --query-port will
use the explicitly configured port, and should only be done with
understanding of the security implications.
Note that this change changes non-existing interface, or non-local
source address errors from fatal to run-time. The error will be
logged and communiction with the server not possible.
Previously, such queries would all be forwarded
independently. This is, in theory, inefficent but in practise
not a problem, _except_ that is means that an answer for any
of the forwarded queries will be accepted and cached.
An attacker can send a query multiple times, and for each repeat,
another {port, ID} becomes capable of accepting the answer he is
sending in the blind, to random IDs and ports. The chance of a
succesful attack is therefore multiplied by the number of repeats
of the query. The new behaviour detects repeated queries and
merely stores the clients sending repeats so that when the
first query completes, the answer can be sent to all the
clients who asked. Refer: CERT VU#434904.
Use the SHA-256 hash function to verify that DNS answers
received are for the questions originally asked. This replaces
the slightly insecure SHA-1 (when compiled with DNSSEC) or
the very insecure CRC32 (otherwise). Refer: CERT VU#434904.
At any time, dnsmasq will have a set of sockets open, bound to
random ports, on which it sends queries to upstream nameservers.
This patch fixes the existing problem that a reply for ANY in-flight
query would be accepted via ANY open port, which increases the
chances of an attacker flooding answers "in the blind" in an
attempt to poison the DNS cache. CERT VU#434904 refers.
Hi Simon,
> Add --shared-network config. This enables allocation of addresses
> the DHCP server in subnets where the server (or relay) doesn't
> have an interface on the network in that subnet. Many thanks to
> kamp.de for sponsoring this feature.
Does this paragraph lack a preposition "by" early on the 2nd line, or am
I mis-guessing the purpose?
...enables allocation of addresses *by* the DHCP server...
The manual page also seems to offer room for linguistic improvement
(apparently written by a German, so I see the typical patterns, and also
the misuse of which vs. that.
I am attaching a patch series vs. git to fix several issues in the
manpage and CHANGELOG.
From 35b88d98429e2fe016d9989d220f6faf2b933764 Mon Sep 17 00:00:00 2001
From: Matthias Andree <matthias.andree@gmx.de>
Date: Sun, 5 Apr 2020 11:18:05 +0200
Subject: [PATCH 1/5] man/dnsmasq.8: Properly capitalize DHCP acronym.
When a request matching the clid or mac address is
recieved the server will iterate over all candidate
addresses until it find's one that is not already
leased to a different clid/iaid and advertise
this address.
Using multiple reservations for a single host makes it
possible to maintain a static leases only configuration
which support network booting systems with UEFI firmware
that request a new address (a new SOLICIT with a new IA_NA
option using a new IAID) for different boot modes, for
instance 'PXE over IPv6', and 'HTTP-Boot over IPv6'. Open
Virtual Machine Firmware (OVMF) and most UEFI firmware
build on the EDK2 code base exhibit this behaviour.
The idea of this option was already discussed years ago on the mailing
list:
https://dnsmasq-discuss.thekelleys.org.narkive.com/ZoFQNaGo/always-ignore-client-identifier#post4
In our production environnement, we discovered that some devices are
using 'client identifier' not unique at all, resulting on IP addresses
conflicts between several devices (we saw up to four devices using same
IP address).
The root cause is probably a buggy operating system/configuration of
decices, but this patch add a configuration workaround on server side
when fixing clients is impossible.
Signed-off-by: Charles Daymand <charles.daymand@wifirst.fr>
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
In a reply proving that a DS doesn't exist, it doesn't matter if RRs
in the auth section _other_ than NSEC/NSEC3 are not signed. We can't
set the AD flag when returning the query, but it still proves
that the DS doesn't exist for internal use.
As one of the RRs which may not be signed is the SOA record, use the
TTL of the NSEC record to cache the negative result, not one
derived from the SOA.
Thanks to Tore Anderson for spotting and diagnosing the bug.
In an era where everything has an MMU, this looks like
an anachronism, and it adds to (Ok, multiplies!) the
combinatorial explosion of compile-time options.
For ease of implementaion, dnsmasq has always forked a new process to
handle each incoming TCP connection. A side-effect of this is that any
DNS queries answered from TCP connections are not cached: when TCP
connections were rare, this was not a problem. With the coming of
DNSSEC, it's now the case that some DNSSEC queries have answers which
spill to TCP, and if, for instance, this applies to the keys for the
root then those never get cached, and performance is very bad. This
fix passes cache entries back from the TCP child process to the main
server process, and fixes the problem.
Change anti cache-snooping behaviour with queries with the
recursion-desired bit unset. Instead to returning SERVFAIL, we
now always forward, and never answer from the cache. This
allows "dig +trace" command to work.
