Build cypress_m8 driver as module for all targets - some of them had it in
their base defconfig while some not. It is required e.g. for UPB PIM (Powerline
Interface Module).
Fixes#3690
Sync the DTS with changes added in newer commits merged after the initial
Yellow/CM5 DTS was written. The sdio1 node now has HS400 mode enabled and
sd_io_1v8_reg has been changed to regulator-fixed.
If HAOS on Yellow is booted for the first time with NVMe data disk present, it
should be preferred over the empty eMMC data partition. This will ease
reinstall of the system and migration from CM4 to CM5. All other data disks
(e.g. if a USB drive is used for them) are still treated as before, requiring
manual adoption using the Supervisor repair.
Add Hailo-8 firmware binary for Rasperry Pi AI accelerators. The version needs
to be determined from the Git history of the kernel sources, as the driver
source code is included in the RPi downstream kernel and the version string
can't be found in the code directly.
Fixes#3663
* Add Makefile variable for Supervisor channel
Allow to set the release channel pre-installed Home Assistant components
like Supervisor and add-on are fetched from. This channel is then also
used at runtime.
* Use choice instead of string variable
* Fix channel in Supervisor updater.json config
* Add newlines
As stated in the docs [1], post-install hook is not executed if the slot
already has an install hook defined. Merge the post-install hook with the
install hook to fix CM5 migration for Yellow.
[1] https://rauc.readthedocs.io/en/latest/using.html#slot-hooks
The timeout of 90s was introduced before it was ensured that the timesync
systemd unit starts after network is online. Now with that, it makes less sense
to wait that long - if network is unreachable at the point the time
synchronization starts, and the server fails to reply on the first sync, the
polling interval is exponentially increased and the benefit of waiting for more
attempts is doubtful.
Since another synchronization attempt is done after network changes its state,
we should rely on that instead of having the 90 seconds interval as a waiting
period for plugging the network cable. Worst case, there are other mechanisms
that should set the time to a reasonably accurate value, making the NTP sync
less importart for most of the cases.
* Move RPi U-Boot patches to version-specific directory
We will need to use different series for 2024.10 which would be used as the
base for CM5 support.
* Remove common.h include from the fileenv cmd
It doesn't seem to be used and common.h has been removed in newer U-Boot.
* Use U-Boot 2024.10 with BCM2712 PCIe patches for Yellow
Use rebased patchset from v2024.01 with the first patch removed. Add patches
needed for PCIe initialization and use rpi_arm64_defconfig as the base config
for both CM4 and CM5.
* Add device tree for CM5 on HA Yellow and adjust config
Add device tree definition based on the CM5 device tree with BCM2712D0 changes
applied, and add nodes required for the on-board peripherals of Yellow.
Currently the difference in serial numbering still requires either changes in
this device tree, or userspace changes to create correct symlinks to make HA
configuration directly compatible with CM4 on Yellow.
* Add config.txt migration for conditional device_tree options
* Fix typos and minor issues found by CodeRabbit
* RaspberryPi: Update kernel to 6.6.51 - stable_20241008
* Update rpi-firmware to version for kernel 6.6.51
* buildroot 2ffac68a74...19027bc796 (1):
> package/rpi-firmware: bump to version 1.20241008 for kernel 6.6.51
Guest agent doesn't start because if HyperV Enlightenments are enabled, the
virtualization gets detected incorrectly. Backport Systemd patch that fixes the
detection, allowing the guest-agent service to meet its dependencies.
This patch should be no longer needed after update of Systemd to v256, or in
case the patch gets eventually backported to the v254 stable branch.
Fixes#3565
* Relocate HAOS Systemd drop-ins to /usr/lib/systemd
With some exceptions, Systemd drop-ins overriding default unit configuration
have been placed to `/etc/systemd/system`. This is meant for user overrides of
those, or per `man 5 systemd.unit` for "system unites created by the
administrator". Relocate all of these to `/usr/lib/systemd` which should be
used as path for units "installed by the distribution package manager" which is
closer to what we're trying to achieve.
This will make it easier to detect changes to unit files once we enable the
possibility to edit the content of /etc.
* Patch systemd-timesyncd.service instead of replacing it fully
If the system fails to boot, some kernel messages may not be shown before the
system fully boots. Enable the debug option for rescue shell options to have an
easy way to see those without modifying GRUB options. This will increase log
verbosity and turn on debug logging for Systemd as well [1].
[1] https://www.freedesktop.org/software/systemd/man/latest/systemd.html#debug
Bump labgrid to latest release. None of the changes require adjustments in the
tests. Remove pytest from requirements.txt, it's not needed anymore, so let pip
to resolve the correct (latest) version from labgrid's dependencies. With these
new dependencies, previous DeprecationWarnings on Python 3.12 are gone now.
Jan Čermák
@RubenKelevra
Jan Čermák
Stefan Agner
Anton Starikov
xtsrthm
dependabot[bot]
Darren Griffin
Viacheslav Bocharov