Currently pre-commit caching seems not to work properly: There is
no cache stored according to GitHub Action tab, and the Prepare
Python dependencies job shows the following warning:
Warning: Path Validation Error: Path(s) specified in the action for caching do(es) not exist, hence no cache is being saved.
This seems to be similar to what have been observed and solved in
Home Assistant Core with https://github.com/home-assistant/core/pull/46696.
Use PRE_COMMIT_CACHE instead of PRE_COMMIT_HOME as well.
* Remove deprecated set-output from GitHub actions
* Replace get-changed-files GitHub action
The GitHub action jitterbit/get-changed-files@v1 seems abandoned.
Use masesgroup/retrieve-changed-files@v3.0.0 which can be used as
a drop in replacement.
Instead of setting the ingress port on install, make sure to set
the port when the add-on gets loaded (on Supervisor startup and
before installation). This is necessary since the dynamic ingress
ports are not stored as part of the add-on data storage themself
but in the ingress data store. So on every Supervisor start the
port needs to be transferred to the add-on model.
Note that we still need to check the port on add-on update since
the add-on potentially added (dynamic) ingress on update. Same
applies to add-on restore (the restored version might use a dynamic
ingress port).
* Make check_port asyncio
This requires to change the ingress_port property to a async method.
* Avoid using wait_for
* Add missing async
* Really await
* Set dynamic ingress port on add-on installation/update
* Fix pytest issue
* Rename async_check_port back to check_port
* Raise RuntimeError in case port is not set
* Make sure port gets set on add-on restore
* Drop unnecessary async
* Simplify check_port by using asyncio.get_running_loop()
* Wait until mount unit is deactivated on unmount
The current code does not wait until the (bind) mount unit has been
actually deactivated (state "inactive"). This is especially problematic
when restoring a backup, where we deactivate all bind mounts before
restoring the target folder. Before the tarball is actually restored,
we delete all contents of the target folder. This lead to the situation
where the "rm -rf" command got executed before the bind mount actually
got unmounted.
The current code polls the state using an exponentially increasing
delay. Wait up to 30s for the bind mount to actually deactivate.
* Fix function name
* Fix missing await
* Address pytest errors
Change state of systemd unit according to use cases. Note that this
is currently rather fragile, and ideally we should have a smarter
mock service instead.
* Fix pylint
* Fix remaining
* Check transition fo failed as well
* Used alternative mocking mechanism
* Remove state lists in test_manager
---------
Co-authored-by: Mike Degatano <michael.degatano@gmail.com>
* Improve D-Bus error handling for NetworkManager
There are quite some errors captured which are related by seemingly a
suddenly missing NetworkManager. Errors appear as:
23-11-21 17:42:50 ERROR (MainThread) [supervisor.dbus.network] Error while processing /org/freedesktop/NetworkManager/Devices/10: Remote peer disconnected
...
23-11-21 17:42:50 ERROR (MainThread) [supervisor.dbus.network] Error while processing /org/freedesktop/NetworkManager/Devices/35: The name is not activatable
Both errors seem to already happen at introspection time, however
the current code doesn't converts these errors to Supervisor issues.
This PR uses the already existing `DBus.from_dbus_error()`.
Furthermore this adds a new Exception `DBusNoReplyError` for the
`ErrorType.NO_REPLY` (or `org.freedesktop.DBus.Error.NoReply` in
D-Bus terms, which is the type of the first of the two issues above).
And finally it separates the `ErrorType.SERVICE_UNKNOWN` (or
`org.freedesktop.DBus.Error.ServiceUnknown` in D-Bus terms, which is
the second of the above issue) from `DBusInterfaceError` into a new
`DBusServiceUnkownError`.
This allows to handle errors more specifically.
To avoid too much churn, all instances where `DBusInterfaceError`
got handled, we are now also handling `DBusServiceUnkownError`.
The `DBusNoReplyError` and `DBusServiceUnkownError` appear when
the NetworkManager service stops or crashes. Instead of retrying
every interface we know, just give up if one of these issues appear.
This should significantly lower error messages users are seeing
and Sentry events.
* Remove unnecessary statement
* Fix pytests
* Make sure error strings are compared correctly
* Fix typo/remove unnecessary pylint exception
* Fix DBusError typing
* Add pytest for from_dbus_error
* Revert "Make sure error strings are compared correctly"
This reverts commit 10dc2e4c3887532921414b4291fe3987186db408.
* Add test cases
---------
Co-authored-by: Mike Degatano <michael.degatano@gmail.com>
* Use find to delete files recursively
Instead of using rm -rf use find to delete files recursively. This
has the added benefit that we do not need to rely on shell expansion.
In particular, shell expansion caused the --one-file-system flag to
not work as intended: The idea was that the content of a (left-over)
bind mounted directory would not get deleted. However, since shell
expansion passed the directory to rm, rm happily deleted also files in
that bind mounted directory.
* Pass arguments correctly
* Fix argument order and stderr output
* Improve error handling
Log with exception level if there is an OS level error. Decode the
stderr output correctly.
* Remove unnecessary newline
* Revert Home Assistant configuration to `/config`
With the new add-on config feature the intention is to provide a good
location for add-on specific configurations. Currently, add-ons such
as Node RED or ESPHome use the Home Assistant config directory because
this location is accessible to the user (via Samba VSCode add-on etc.).
To make it clear to add-on developer that the new intention is to use
add-on specific config, the implementation now bind mounts the add-on
configuration directory to `/config`. And since some add-ons still need
access to the Home Assistant configuration, its config folder is mounted
to `/homeassistant` under the new scheme.
However, users do know the path `/config`, and edit things e.g. through
the SSH or VS Code add-on. Also `/config` is still the
directory from inside the Core container.
For SSH/VS Code add-on we could work around using a symlink, but that
only works as long as these add-ons don't have a add-on config
themselfs.
This all has very high confusion potential, for not much gain. The
renaming is mainly "developer friendly", but not really user friendly.
Let's minimize potential confusion, and keep things where they are.
The Home Assistant config directory stays at `/config, in all cases,
everwhere.
Map the new add-on configuration directory to `/addon_config`.
* Adjust tests/comments
